cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - You can Bookmark boards, posts or articles that you'd like to access again easily! X

Cam follower/ slot

ptc-4410103
1-Visitor

Cam follower/ slot

Hello, I'm trying to make a winch with a epicyclic gear and a ratchet pawl (se the attached picture).

I want the pawl to move along the heels on the ratchet, but also be able to move away so the winch can freewheel.

The pawl is attached with a pin constraint, and If i do an additional slot constraint, with a datum curve along the ratchet, the pawl moves as i want but it is not able to lift from the curve.

I have also tried to do a cam follower in mechanism and everything seems fine until i try to move the assembly. Then the pawl just stands still and doesn't move as it is supposed to do. I attached a spring but it didn't help.

How would you do this?

Best regards and excuse my english.

Anton


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
1 REPLY 1

I would suggest making this a conditional statement. If the statement is true, it follows one condition and if false, the other.

Announcements
NEW Creo+ Topics: Real-time Collaboration


Top Tags