Community Tip - Did you get an answer that solved your problem? Please mark it as an Accepted Solution so others with the same problem can find the answer easily.
X
I have imported artwork from AutoCAD as a feature in my model. I have projected the feature onto a revolved cone shape. I now need to show this is a raised feature on the surface. Any suggestions on the best method to accomplish this?
This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
i think "offset surface, use sketch, with draft" will do this....but requires Advanced assembly licence.
other option is to
*extrude quilts *drafter the quilts *offset foundation surfaces to create endcaps for the quilts *merge extruded,k drafted quilts with end caps. *solidy or cut with the quilts..
You might want to play with a "wrapped" curve as opposed to a "projected curve". wrapped curves attempt to maintain length of the sketched entities while placing them on the surface. Wrap is limited to only cylindrical surfaces, I am not sure about conical surfaces???
Pete
On Mon, Mar 9, 2015 at 9:43 AM, Fariello, Patrick <-<br/>> wrote:
> Offset surface, expand feature, or expand w/ draft > > > > *From:* David Bower [
