Export Config Settings

[jlippeth]

Users

I would like to Export a 3D part model to 3D STEP with annotations and parameters included.

I use .hol files for holes and taped holes and would like to export the annotation associated to them.

Using the config.pro options:

intf3d_out_parameters all

intf3d_out_annotations yes



After exporting the model, I re-import it and no annotation nor parameters show up.

Also where does one config the output type AP203 or AP214?

Any suggestions?





Thanks

Jeff



Jeff Lippeth ▪ Mold Design Engineer



NyproMold, Inc.

955 Tri-State Parkway, Gurnee IL 60031

144 Pleasant St, Clinton MA 01510 ▪ www.nypromold.com
This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

[jlippeth]

50% Answered

My first attempt I did not find the config setting for Export.

But using the setting: step_export_format (type)

You can select from many versions of STEP

AP203E2 and AP214IS support Annotations and Parameters.

Using the setting: step_export_format AP203ET

I was able to export parameters with the 3D model.

I am still not able to export the hole note annotations.

Keep you posted



Jeff



Jeff Lippeth ▪ Mold Design Engineer

NyproMold, Inc.

▪ T 847.855.2226