Projected Reference Points in Creo Parametric 2.0

[rgatineau]

Is it possible to create projected reference points in Creo Parametric 2.0? If so, how can it be done?

This functionality is present in Creo Elements/Direct Drafting 17. See: http://www.ptc.com/appserver/wcms/relnotes/note.jsp?&im_dbkey=105261

This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

[ClintWalton]

Hi Romuald,

I just did a quick seach in our database on this but I haven't tested. It seems like something changed in Pro/ENGINEER Wildfire 4.0. What release of Pro/ENGINEER were you using before?

Here is a related document:

https://www.ptc.com/appserver/cs/view/solution.jsp?n=143762&source=tssearch

[rgatineau]

Hi Walton

thanks for your help

Our old proE version was proE wildfire 3

[NaveenKumarGong]

Hello Romuald GATINEAU,

Your generated the drawing in Pro-E WF 3.0 right?

While importing a drawing from older version to newer version the software will represent the dual dimensions above the leader line as per red color dimension in uploaded image. These were not changing by modifying in options also (Drawing options-- text orientation in dimension controls).

Thanks & Regards,

Naveen Kumar Gongu.

[rgatineau]

Hello Naveen Kumar Gongu

yes you're right the drawing was begun with proE-WF 3.0 and now i'm working on the same drawing with Creo 2

OK so if I understand there isn't really a solution

thanks for your help

[ClintWalton]

This document might help.

https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS25598&source=tssearch