cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - New to the community? Learn how to post a question and get help from PTC and industry experts! X

call family table instance with pro/programs

cyılmaz
8-Gravel

call family table instance with pro/programs

hello everyone,

i want to replace  *.prt with pro/programm from family table

but this *.prt is generic it have a family table

how can i replace?

2.JPG

1.JPG

Best Regards,

Cömert YILMAZ

ACCEPTED SOLUTION

Accepted Solutions

If you know the name of the instance you want to place, it's easy...

Put this in your RELATIONS (or use an INPUT PARAMETER)

MY_INSTANCE = "510FB0158_1"

Then open your PRO/PROGRAM and look where the current part is being placed.

ADD PART 510FB0_158_159_160

...

END ADD

Now replace "510FB0_158_159_160" with "(MY_INSTANCE)"

ADD PART (MY_INSTANCE)

..

END ADD

Now change the value of MY_INSTANCE 🙂

When this succeeds, you could also look into the "lookup_inst" function...but that's a whole different ballgame

View solution in original post

7 REPLIES 7

See Creo Parametric Help Center Example: A Parametric Design for a Blender Cover

If you know the name of the instance you want to place, it's easy...

Put this in your RELATIONS (or use an INPUT PARAMETER)

MY_INSTANCE = "510FB0158_1"

Then open your PRO/PROGRAM and look where the current part is being placed.

ADD PART 510FB0_158_159_160

...

END ADD

Now replace "510FB0_158_159_160" with "(MY_INSTANCE)"

ADD PART (MY_INSTANCE)

..

END ADD

Now change the value of MY_INSTANCE 🙂

When this succeeds, you could also look into the "lookup_inst" function...but that's a whole different ballgame

thank you so much  for help

No problem.

If you want to know more about the lookup_inst then just give a shout 🙂

Hi TeunHam,

i don't know lookup_ins or what does it .

but i have i problem .

i have two parts and there are generic part. (510FB0161.ASM and 510FB0166_167_168.ASM)

if my chose 510FB0161_1 i want to the suppress 510FB0166_167_168.ASM

or

if my chose 510FB0166_1 i want to the suppress 510FB0161.ASM

1.JPG

2.JPG

you can see program;

VERSION 3.0
REVNUM 474
LISTING FOR ASSEMBLY S1_FAN_OMEGA

INPUT
S1_OMEGA_TIPI NUMBER
"OMEGA TİPİNİ SEÇİNİZ. ( 1=SINGLE , 2=DUAL )"
S1_HAVA_AKIS_YONU NUMBER
"HAVA AKIŞ YÖNÜ SEÇİNİZ. ( 1=SAĞ , 2=SOL )"
S1_TEK_PARCA_FB_SINGLE STRING
"FB KODUNU GİRİNİZ.(510FB0161_...)"
S1_PARCALI_FB_SINGLE STRING
"FB KODUNU GİRİNİZ.(510FB0166_.,510FB0167_.,510FB0168_.)"
S1_TEK_PARCA_FB_DUAL STRING
"FB KODUNU GİRİNİZ.(510FB0152_...)"
S1_IKI_PARCALI_FB_DUAL STRING
"FB KODUNU GİRİNİZ.(510FB0157_...)"
S1_PARCALI_FB_DUAL STRING
"FB KODUNU GİRİNİZ.(510FB0163_.,510FB0164_.,510FB0165_.)"
END INPUT

RELATIONS
WEIGHT=PRO_MP_MASS
END RELATIONS


ADD FEATURE (initial number 1)
INTERNAL FEATURE ID  1


DATUM PLANE

  NO.     ELEMENT NAME    INFO                                                 
  ---     -------------   -------------                                        
   1      Feature Name    Defined                                              
   2      Constraints     Defined                                              
   2.1    Constraint #1   Defined                                              
   2.1.1  Constr Type     X Axis                                               
   3      Flip Datum Dir  Defined                                              
   4      Fit             Defined                                              
   4.1    Fit Type        Default                                             

NAME = ASM_RIGHT

    FEATURE IS IN LAYER(S) :
      01__ASM_ALL_DTM_PLN - OPERATION = SHOWN
      01__ASM_DEF_DTM_PLN - OPERATION = SHOWN

END ADD


ADD FEATURE (initial number 2)
INTERNAL FEATURE ID  3


DATUM PLANE

  NO.     ELEMENT NAME    INFO                                                 
  ---     -------------   -------------                                        
   1      Feature Name    Defined                                              
   2      Constraints     Defined                                              
   2.1    Constraint #1   Defined                                              
   2.1.1  Constr Type     Y Axis                                               
   3      Flip Datum Dir  Defined                                              
   4      Fit             Defined                                              
   4.1    Fit Type        Default                                             

NAME = ASM_TOP

    FEATURE IS IN LAYER(S) :
      01__ASM_ALL_DTM_PLN - OPERATION = SHOWN
      01__ASM_DEF_DTM_PLN - OPERATION = SHOWN

END ADD


ADD FEATURE (initial number 3)
INTERNAL FEATURE ID  5


DATUM PLANE

  NO.     ELEMENT NAME    INFO                                                 
  ---     -------------   -------------                                        
   1      Feature Name    Defined                                              
   2      Constraints     Defined                                              
   2.1    Constraint #1   Defined                                              
   2.1.1  Constr Type     Z Axis                                               
   3      Flip Datum Dir  Defined                                              
   4      Fit             Defined                                              
   4.1    Fit Type        Default                                             

NAME = ASM_FRONT

    FEATURE IS IN LAYER(S) :
      01__ASM_ALL_DTM_PLN - OPERATION = SHOWN
      01__ASM_DEF_DTM_PLN - OPERATION = SHOWN

END ADD


ADD FEATURE (initial number 4)
INTERNAL FEATURE ID  7
TYPE = COORDINATE SYSTEM
NAME = ASM_DEF_CSYS


    FEATURE IS IN LAYER(S) :
      05__ASM_ALL_DTM_CSYS - OPERATION = SHOWN
      05__ASM_DEF_DTM_CSYS - OPERATION = SHOWN

END ADD

IF S1_OMEGA_TIPI==2
     ADD SUBASSEMBLY S1_OMEGA_DUAL
     INTERNAL COMPONENT ID 40
     END ADD
END IF

IF S1_OMEGA_TIPI==1
     ADD SUBASSEMBLY S1_OMEGA_SINGLE
     INTERNAL COMPONENT ID 49
     END ADD
END IF

IF S1_OMEGA_TIPI==1
     IF S1_HAVA_AKIS_YONU==2

         ADD SUBASSEMBLY (S1_TEK_PARCA_FB_SINGLE)
         INTERNAL COMPONENT ID 60
         PARENTS = 49(#5)
         END ADD

        ADD SUBASSEMBLY (S1_PARCALI_FB_SINGLE)
         INTERNAL COMPONENT ID 63
         PARENTS = 49(#5)
         END ADD
     END IF

     IF S1_HAVA_AKIS_YONU==1
         ADD SUBASSEMBLY (S1_TEK_PARCA_FB_SINGLE)
         INTERNAL COMPONENT ID 68
         PARENTS = 49(#5)
         END ADD

         ADD SUBASSEMBLY (S1_PARCALI_FB_SINGLE)
         INTERNAL COMPONENT ID 73
         PARENTS = 49(#5)
         END ADD
     END IF
END IF

IF S1_OMEGA_TIPI==2
     IF S1_HAVA_AKIS_YONU==2
         ADD SUBASSEMBLY (S1_TEK_PARCA_FB_DUAL)
         INTERNAL COMPONENT ID 76
         PARENTS = 40(*)
         END ADD

         ADD SUBASSEMBLY (S1_IKI_PARCALI_FB_DUAL)
         INTERNAL COMPONENT ID 83
         PARENTS = 40(*)
         END ADD

         ADD SUBASSEMBLY (S1_PARCALI_FB_DUAL)
         INTERNAL COMPONENT ID 88
         PARENTS = 40(*)
         END ADD
     END IF

     IF S1_HAVA_AKIS_YONU==1
         ADD SUBASSEMBLY (S1_TEK_PARCA_FB_DUAL)
         INTERNAL COMPONENT ID 93
         PARENTS = 40(*)
         END ADD

         ADD SUBASSEMBLY (S1_IKI_PARCALI_FB_DUAL)
         INTERNAL COMPONENT ID 98
         PARENTS = 40(*)
         END ADD

         ADD SUBASSEMBLY (S1_PARCALI_FB_DUAL)
         INTERNAL COMPONENT ID 103
         PARENTS = 40(*)
         END ADD
     END IF
END IF

MASSPROP
END MASSPROP

CAD_user
14-Alexandrite
(To:cyılmaz)

For doing this, do I need aax extension?
In my creo I don't have the aax extension, but I'm able to open and edit Pro program.

I know it's out of context but I still haven't figure out, what aax unlocks.
Announcements
NEW Creo+ Topics: Real-time Collaboration


Top Tags