cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Save a CREO 3.0 model as a CREO ELEMENT/PRO model

SOLVED
Highlighted
Participant

Save a CREO 3.0 model as a CREO ELEMENT/PRO model

Is it posssible to save a model as CREO ELEMENT/PRO from CREO 2.0 ??

Regards

Tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: Save a CREO 3.0 model as a CREO ELEMENT/PRO model

Files are not backwards compatible for CREO.

You can open earlier versions with later versions, but not the other way around.

5 REPLIES 5

Re: Save a CREO 3.0 model as a CREO ELEMENT/PRO model

Mathieu,

it is not possible.

Martin Hanak


Martin Hanák

Re: Save a CREO 3.0 model as a CREO ELEMENT/PRO model

And from CREO 2.0 ??

Re: Save a CREO 3.0 model as a CREO ELEMENT/PRO model

Files are not backwards compatible for CREO.

You can open earlier versions with later versions, but not the other way around.

Re: Save a CREO 3.0 model as a CREO ELEMENT/PRO model

Using the GCRI tool you can open newer version models from Creo in older versions of CE/Pro or Pro/ENGINEER. This should provide the solution you need:

https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS34964&posno=1&q=gcri&nav=ptcproductgroups...

Re: Save a CREO 3.0 model as a CREO ELEMENT/PRO model

Mathieu

It was discussed in one of the earlier post http://communities.ptc.com/message/254637#254637

This post may give you some more information about this.