cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Stay updated on what is happening on the PTC Community by subscribing to PTC Community Announcements. X

Creo 3 & Object TOOLKIT C++ 2 applications compatibility

iallia
1-Newbie

Creo 3 & Object TOOLKIT C++ 2 applications compatibility

Will TK Object TOOLKIT C++ 2 applications be working on Creo 2 the same as Creo 3?


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
1 REPLY 1

My experience with Creo toolkits is that they are consistently forward-compatible. That is, if you build it on Creo Parametric 2.0, it will also run on Creo Parametric 3.0 and later. I have two applications which use both Creo Parametric Toolkit and OTK C++, and the versions I built on Creo 2.0 ran without issue on Creo 3.0.

However, you should not expect to do the opposite: If you build a toolkit application on Creo Parametric 3.0, it will not run on 2.0.

|+|  M a r k  |+|

Top Tags