cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - When posting, your subject should be specific and summarize your question. Here are some additional tips on asking a great question. X

Modbus values not reflecting in Kepware Quick client

Sri1
13-Aquamarine

Modbus values not reflecting in Kepware Quick client

Hi,

 

We have done a Modbus connection to Kepware to fetch an Energy meter data. The modbus driver is running in an edge PC pushing energy meter data to Keware every 2 secs. But the data is not properly updating in Kepware and has a delay update of more than 1-2 mins(in Quick client). 

We cross verified with ModScan(Instead of Kepware) and there we were getting data every 2 secs

We checked with the below senarious.

1) Channel's ScanMode was set to Respect Client-Specified Scan Rate.

2) Changed Channel Scan mode and scan rate to various values (below 2000 ms)

None of these worked.

 

Regards,

Sri1

1 REPLY 1
AB_7478123
5-Regular Member
(To:Sri1)

Greetings, 

Unfortunately this is likely not a quick answer and we would certainly want to investigate. If you could create a support ticket through the E Support portal, we can investigate what may be going on.

 

Kind Regards,

Andrew Black 

Senior Technical Support Engineer

Kepware 

Top Tags