Solved: Re: Display 3D Plots

WanTschen · ‎Jul 12, 2011

Hi,

my Problem is to display 3D Plots. Disabling the boarders will show my plot until i scroll in the document.

I found another solution to reduce color depth to 16 Bit, but Catia dislike this changes not even Wn7 Aero runs on 16 Bit.

I noticed this problem on various machines running MC14 and MC15(trail). Prime1.0 does not support 3D plots

Did I mixed up a bug with a feature? What's the point anyway?

Is there a workaround for the 3D Problem?

Thx

VladimirN · ‎Jul 13, 2011

Try the following steps:
1. Update drivers for video cards (up to the latest available version).
2. Turn off the "Aero" when working with Mathcad.

P.S. Oh I see, you have the latest driver 275.33 WHQL (2011.06.01).

VladimirN · ‎Jul 13, 2011

Hello!

In what operating system you are running?

WanTschen · ‎Jul 13, 2011

Win7 SP1x86, W2K8 SP2 x86, W2K8R2 SP1x64

But I'd prefer my Win7 machiene. (AMD X4, 4GB RAM, Nvidia GT240 (275.33WHQL) )

Tried to run it on my AAO110 Netbook with XP. Seems to be working, but with bad performance

VladimirN · ‎Jul 13, 2011

Try the following steps:
1. Update drivers for video cards (up to the latest available version).
2. Turn off the "Aero" when working with Mathcad.

P.S. Oh I see, you have the latest driver 275.33 WHQL (2011.06.01).

Udo · ‎Jul 29, 2011

Hi anyone!

Attached is a simple mcd file with an attempt to make a 3D plot. It does not show the 3D graph on my AMD 64-bit Windows 7 machines.

I tried to uncheck borders and modify compatibility. No luck.

Thanks for suggestions

Udo

VladimirN · ‎Jul 30, 2011

Udo, hello!

In what version Mathcad you work?

...I tried to uncheck borders and modify compatibility. No luck...

Try to contact technical support PTC, creating a new "Case" here: https://www.ptc.com/appserver/cs/case/case_logger.jsp

P.S. Plots created in the document are as follows:

AndyWesterman · ‎Aug 01, 2011

I've had similar problems displaying 3D plots, the thing that fixed it for me was reducing the Colours setting from "True Color" to "High Color".

I have set everything else back to the windows 7 default state & no compatibility moes now & the plots still seem to work fine.

Regards

Andy

Udo · ‎Aug 01, 2011

Thanks, Andy!

Yes, the change in color setting fixed the problem for me, at least on the 64-bit W7 computer I am using presently.

Udo

VladimirN · ‎Aug 02, 2011

Also, try to enable "Adjust for the best performance" in "Performance Options" (see attachment).