Re: Mathcad downloads

ptc-6842971 · ‎Jan 30, 2015

I have entered into http://support.ptc.com/support/mathcad_downloads.htm, from my support page. I see there are many links to download versions of the application. For example, I found:

Product: Mathcad

Version: 14.0

Datecode:M020

License: Single-User

File(s) to download:

Is this the complete software (version 14.0) or is it only an update? is the single-user license included, or how can I obtain one of mathcad 14?

In advancce, thank you very much.

ELSID · ‎Feb 04, 2015

Latest version is MathCAD 15 M030.

The last version of MathCAD 14 that I recall was M040 ... which had a memory bug -->so M030 was the last one my company used before going to 15 and Prime 3.0

Werner_E · ‎Feb 04, 2015

ELSID wrote:
Latest version is MathCAD 15 M030.
The last version of MathCAD 14 that I recall was M040 ... which had a memory bug -->so M030 was the last one my company used before going to 15 and Prime 3.0

The last MC14 version was M035, and yes, it had a bad memeory bug so it was better to stay with M030.

M040 was planned but then PTC decided to name it Mathcad 15 F000 and milk the cow a bit more.

Werner_E · ‎Feb 04, 2015

Which version of Mathcad are you using currently?

Usually there are not updates available for MC14 - evrey file you can load down is a full installation, but you need a valid licens (file) to be able to run it. So if you update you shuld save your license file first just to be on the save side.

Maintainance releases usually are downloadable for customers with active maintainance only, but MC14 M020 was released for ALL customers becuase earlier versions had really severe bugs which were addressed in M020.

Mathcad 15 can be seen as a simple continuation of Mathcad 15, as already written before MC15 F000 originally was planned as MC14 M040.

VladimirN · ‎Feb 05, 2015

Mathcad 14 M035 is the latest service release for MC14. Here is a link for Mathcad software download page on PTC's site: https://support.ptc.com/appserver/auth/it/esd/product.jsp?prodFamily=MCD

For processing a new license you need to use "Configure New Software" option: https://support.ptc.com/cgi/cs/apps/lmni/lmni.pl