this value must be real

[ptc-4346041]

Hello everyone,

My graphics don't to display because i have the errors :

this value must be real

And the second error is :

all evaluations resulted in iether an error or a complex result

Can you to help me , please.

Thank you in advance.

[AndyWesterman]

Hello Olivier,

I'm not sure what your calculation is trying to produce but when you look at the values returned from the TF191 function all have a complex component & the graaph plotting routines cannot understand what to do.

One option may be to use the Re(...) function which returns only the real component.

Obviously this does lose information - so may not be the correct method

Hope this helps

Andy

[ptc-4346041]

This variable is undefined :

Do you can to help me ?

Thank you very much

Olivier

[KHecht]

There was a problem in the definition of tpas. Since Nx = 0, tpas has values of 0 and -1, and -1 can't be used as a matrix subscript. H8 calculates imaginary values, so there is still a problem there.

[ptc-4346041]

Why xx(t.pas2) is not egal at 50 MHZ ?

I don't understand !

Thank you in advance.

Olivier

[ptc-4346041]

[ptc-4346041]

ModuleofH8(f 0, tpas2, tpas)=

[Fred_Kohlhepp]

this value must be real

Your function is TF191(f,tpas2), and you're plotting against tpas2. But f is a vector with many different values. If you piick one, that error goes away. (Mathcad learned error messages from Microsoft; the message is,"There's an error here, good luck.")

all evaluations resulted in iether an error or a complex result

Mathcad can't plot an imaginary result, but you can plot the real part and the imaginary part.(Usually one of them is what you want.)

[ptc-4346041]

My question is : How to plot a frequency of 50MHZ ans a frequency of 50.05MHz ?

[ptc-4346041]

My question is : How to plot 50MHz and 50.05MHz ?

Thank you very much

[Fred_Kohlhepp · Accepted solution]

simple