Community Tip - You can subscribe to a forum, label or individual post and receive email notifications when someone posts a new topic or reply. Learn more! X
We are creating a IoT deployment based on the MQTT protocol, which will be the only source of incoming data.
Is there a sample deployment architecture for Thingworx protocol adapter toolkit (PAT) with MQTT channel and MQTT broker which is scalable? The target number of devices to be supported on the Thingworx platform is ~25k.
Solved! Go to Solution.
Hi @ravi2.
This link to the protocol adapter toolkit in the ThingWorx Help Center may be helpful. In addition, please take a look at the Sizing guide available here.
Other than that, it may be necessary to engage with one of our Global Services professionals to assist with your configuration and scaling. To do so, please contact the Sales team.
Regards.
--Sharon
Hi @ravi2.
This link to the protocol adapter toolkit in the ThingWorx Help Center may be helpful. In addition, please take a look at the Sizing guide available here.
Other than that, it may be necessary to engage with one of our Global Services professionals to assist with your configuration and scaling. To do so, please contact the Sales team.
Regards.
--Sharon
Hi @ravi2.
If my previous post answered your question, please mark it as the Accepted Solution for the benefit of others with the same question. If you still have questions, please let us know.
Regards.
--Sharon