ECAD MCAD Collaboration

[dm-3]

Hi,

I am working with ECAD MCAD collaboration module. I find options like set as accept, set as reject are greyed out. What could be the possible reason?

I use Creo Parametric 2.0. I tried with both View 2.0 & 3.0 M031.

--

Dhinesh

This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

[msodoma]

Hi Dhinesh,

Did you ever find a solution to this problem? I have exactly the same problem. If you found a solution, could you please forward it to me at msodoma@gnresound.com? We are using Creo 3.0, M040 and Creo View 3.1, F000. (I tried using Creo View 3.0, M031, but that did not work either.)

Thanks,

Mark

[dm-3]

The Allegro file is a baseline IDX and does not allow preview, cross-select, or accept/reject for that type of IDX file. Only incremental IDX files will have this functionality enabled.
In Creo View you can open baseline IDX to see what it looks like.

[Marco_Tosin]

What do you mean with incremental?

IDX = Incremental Data eXchange (see below link)

IDF, IDX

[msodoma]

Hi Dinesh,

Thank you for the reply. You are correct, but we were experiencing the same symptom with a different problem. After working with PTC support for several weeks the problem went away. I don't know why. I suspect that there was an issue with the permissions on the license server because the workstations that exhibited this problem could not access the ProductView_Validate license. Sometimes our IT changes permissions on servers and does not notify anyone. Apparently, IT restored the permissions and the problem vanished. I can't prove this. Just a suspicion.