cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Your Friends List is a way to easily have access to the community members that you interact with the most! X

Weld material Question

robboet
2-Explorer

Weld material Question

dear all

I am using Creo 2 and have a Question about Welding.

I defined a weld material and assigned a material from the database

The Mass of the weld is not there.

i assigned a diameter and a lenght , But wat lenght do i asign ,the wire lenght or the weld lenght?

Can anyone tel what i do wrong?

Best regards Rob

lassen.png


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
2 REPLIES 2

Hi Rob,

you need to set a cross section, for example a ASM_RIGHT or so, or you can create a Datum in the ASM and use it as a cross section. You also need to set the Weld Material in the options.

If you did all that check the mass of your assembly, the mass of the weld is now included.

18-11-2014 10-20-04 AM.jpg

18-11-2014 10-37-19 AM.jpg

Best regrads,

André

Thanks Andre !!

Announcements
NEW Creo+ Topics: Real-time Collaboration


Top Tags