changement de tolerance

[ggerard]

Bonjour

Sur un drawing, est-il possible d 'appliquer un changement de format des tolerances (±0.014 -> ±14) pour rendre un plan beaucoup plus lisible, en une seule fois ou doit-on passer les cotes une à une?

Merci

GG

This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

[David_M]

If you change your tolerance units to thousands of an inch, you'd need to make it clear that you are using a different unit there to elsewhere in the drawing. I'm not aware of a way to change the tolerance unit by itself and I wouldn't encourage it. You can override the tolerance values individually by double clicking each dimension.

[emccann]

Bonjour Guillaume,

sous l'onglet annotate>format>reapeat last format.

step 1 : modifier une cote avec le format voulu.

step 2 : selectionner une nouvelle cote et ensuite cliquer sur "REPEAT LAST FORMAT"

*** en appuyant sur CTRL, il est possible de sélectionner plusieurs cotes et toutes les changer en même temps.

Enjoy.