curve through points

[naveenkumar6]

Hi,

Can anyone please help me how to edit the curve which is drawn through points.

I have plotted the curve in Microsoft excel and creo but the curve from creo is different. can anyone please help me to solve my issue. I need a curve which is similar to the one drawn using excel(image-1).

I have attached the profile points excel sheet.

Thanks

[Pier_8wd]

 Hi naveen,

Your excel curve has not the same scale on X & Y, that is why the curve shown in Creo is different (but much true).

[MartinHanak · Accepted solution]

Hi,

• remove line no.28 from Excel table (it is equal to line no.2)
• create points offset from csys
• create 1-st curve through points using points offset from csys
• create 2-nd curve through points ... connect start and end point of 1-st curve + define tangency in end points

You will get this shape:

[naveenkumar6]

Hi Martin,

Thanks a lot for helping me solve my problem

---

@MartinHanak wrote:

Hi,

• remove line no.28 from Excel table (it is equal to line no.2)
• create points offset from csys
• create 1-st curve through points using points offset from csys
• create 2-nd curve through points ... connect start and end point of 1-st curve + define tangency in end points

You will get this shape:

---