cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

exploded view rotation angle incorrect in creo 4.0

SOLVED
Visitor

exploded view rotation angle incorrect in creo 4.0

Hi community, 

I have a struggle with an exploded assembly, more specific the rotating portion in the exploded view.

 

When I go into explode on the assembly and instead giving a distance I give an angle and

select the rotating axis and the components I want to rotate around the selected axis,

it does so…but…the specified angle in my case 9.5 Deg shows up on the drawing as 8.5 Deg

AW_8166108_0-1603475242413.png

 

AW_8166108_1-1603475242444.png

 

 

AW_8166108_2-1603475242462.png

 

AW_8166108_3-1603475242485.png

 

Anybody else has had this issue? Anybody has a fix for this?

Any help will be highly appreciated

Thanks in advance

Andreas

1 ACCEPTED SOLUTION

Accepted Solutions

Re: exploded view rotation angle incorrect in creo 4.0

Did you happen to move it in the negative direction?  One direction the angle value will go up by your increment (9.5).  The other direction, it will give you a value somewhere below 360 based on multiples of your increment (9.5).  Given your increment of 9.5, the first multiple below 360 is 351.5.  That is 8.5 degrees from your start.  Watch the number in the tool bar.


Creo is an endless adventure: Always more to learn.

View solution in original post

2 REPLIES 2

Re: exploded view rotation angle incorrect in creo 4.0

Did you happen to move it in the negative direction?  One direction the angle value will go up by your increment (9.5).  The other direction, it will give you a value somewhere below 360 based on multiples of your increment (9.5).  Given your increment of 9.5, the first multiple below 360 is 351.5.  That is 8.5 degrees from your start.  Watch the number in the tool bar.


Creo is an endless adventure: Always more to learn.

View solution in original post

Re: exploded view rotation angle incorrect in creo 4.0

Hi kdirth, 

Thank you for your reply, and thank you for solving my issue.

I would have never guessed that the positive or negative angle call out would make a difference,

Since you have the choice with the direction arrow to choose in which direction you would like

To rotate your parts in the exploded view.

AW_8166108_0-1604084742815.png

 

 

Thank you so much

Andreas

Announcements