cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - You can change your system assigned username to something more personal in your community settings. X

using solid tools and need help with all tool parameter names...

snguyen
1-Newbie

using solid tools and need help with all tool parameter names...

Good morning,
I am starting to use solid tools to help with collision checks. I
created a solid tool and got it into my session of ProMan but I do not know
all the parameters name to finish up the geometry page.
Like, "length=Tool Length" and "cutter_diam=Cutter Diameter". I am trying to
fill out all the information for the tool but have no luck with the correct
parameter names. If anybody knows or has a copy of all the parameters for
tool descriptions it will be helpful.

Thanks.

Son Nguyen
108 w. 2nd Street
Assaria, KS. 67416
(785) 667-7763 ext. 3477


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
3 REPLIES 3

Thanks to Paul for the information.
It works like a charm. Hope it can help somebody else that is needing this
information.
SteveLucas
13-Aquamarine
(To:snguyen)

The quickest way to get the parameters is to do info from the cutting tools setup on an existing tool of the same type. that lists all the parameters of that tool type

Hi, When using the lathe functions of Pro/manufacturing, I only see one turning tool type available.Is there a path to set to access a tool library?may somebody mail me "ptc turning tool store??" f4rh4d@live.com thnx

Announcements
NEW Creo+ Topics: Real-time Collaboration


Top Tags