On 11/13/14 13:47, Bob Condra wrote:
>
> Randy,
>
> Thanks for the quick response. This would be easy, except we do not have BMX.
>
> Is there another way around it if we do not have BMX?
>
Yes. You can still create a feature and create xcog, ycog, and zcog parameters. Then simply create a (offset from coordinate system) point and use relations to make the points dimensions equal to the *cog parameters.
> Is there a way to extract the information from the MassProperties feature? Maybe through relations?
>
> Thanks,
>
> Bob
>
> **
>
> *
>
> Bob Condra
>
> *
>
> **Mechanical Engineer
>
> **
>
> Trijicon,Inc.
>
> 248-960-7700 Ext.1147
>
> 49385 Shafer Avenue | P.O. Box 930059
>
> Wixom, Michigan 48393 US
>
> - |
www.trijicon.com>
> *From:*Randy Jones [
|
www.trijicon.com <
">http://www.trijicon.com>>
> /
> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> /
>
> /This electronic message contains information that may be confidential, privileged, proprietary, or subject to the export control laws of the United States, including the Arms Export Control Act (22 U.S.C. 2571 et seq.), the International Traffic in Arms Regulations (22 C.F.R. Part 120 et seq.),
> and/or the Export Administration Regulations (15 C.F.R. Part 730 et seq.). This information is intended for the use of the addressee only, and if you are not the intended recipient, any disclosure, copying, distribution, printing, or any other use of, the contents of this message is prohibited.
> Any transfer, retransfer, or disclosure of this data to a Foreign Person without United States Government authorization is also prohibited. If you have received this message in error, please notify the sender and destroy the original message./
>
> -----End Original Message-----
>
>
>
>
> --
> ------------------------------------------------------------------------
> Randy Jones
> Systems Administrator
> Great Plains Mfg., Inc.
> 1525 E North St
> PO Box 5060
> Salina, KS USA 67401
> email:- <
">mailto:->> Phone: 785-823-3276
> Fax: 785-667-2695
> ------------------------------------------------------------------------
--
------------------------------------------------------------------------
Randy Jones
Systems Administrator
Great Plains Mfg., Inc.
1525 E North St
PO Box 5060
Salina, KS USA 67401
email: -
Phone: 785-823-3276
Fax: 785-667-2695
------------------------------------------------------------------------
