error during mesh creation
May 13, 2021
09:28 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Notify Moderator
May 13, 2021
09:28 AM
error during mesh creation
I am using Creo Simulate 4.0 M060
Error message: "Some contacting components have large difference in their tolerance values"
Here are the errors that I faced
"Some contacting components have large difference in their tolerance values"
Error message: "Some contacting components have large difference in their tolerance values"
Here are the errors that I faced
"Some contacting components have large difference in their tolerance values"
Solved! Go to Solution.
ACCEPTED SOLUTION
Accepted Solutions
May 14, 2021
05:18 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Notify Moderator
May 14, 2021
05:18 PM
Hi @HarsadShah,
- Set the same absolute accuracy for the top assembly , all sub-assembly and components
- Set config.pro option
- enable_absolute_accuracy to yes
- enable_assembly_accuracy to yes
- default_abs_accuracy to desired value, for instance 0.0001
- Open each part or assembly separately in standard mode
- Select File > Properties > Accuracy > change , access to Accuracy dialog box
- Select Absolute
- Enter desired value, for instance 0.01
- Click Regenerate Model
- Repeat this step for all components of the top assembly and sub-assembly and their components.
Thanks,
Vipul
1 REPLY 1
May 14, 2021
05:18 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Notify Moderator
May 14, 2021
05:18 PM
Hi @HarsadShah,
- Set the same absolute accuracy for the top assembly , all sub-assembly and components
- Set config.pro option
- enable_absolute_accuracy to yes
- enable_assembly_accuracy to yes
- default_abs_accuracy to desired value, for instance 0.0001
- Open each part or assembly separately in standard mode
- Select File > Properties > Accuracy > change , access to Accuracy dialog box
- Select Absolute
- Enter desired value, for instance 0.01
- Click Regenerate Model
- Repeat this step for all components of the top assembly and sub-assembly and their components.
Thanks,
Vipul
