cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Your Friends List is a way to easily have access to the community members that you interact with the most! X

The value for MASS_GR cannot be changed

tperry
1-Visitor

The value for MASS_GR cannot be changed

A user is receiving the following error.  "The value for MASS_GR cannot be changed".   The material properties have the correct units and agree with the standards we apply. Any thoughts of what could be the issue? Thanks  CREO2 m120 ~ Windchill 10 m20

ACCEPTED SOLUTION

Accepted Solutions
Mahesh_Sharma
22-Sapphire I
(To:tperry)

Tim,

Parameter Mass_GR is relation based.

Try updating mass properties using File > Prepare > Change Mass properties > Generate report and try Save and upload.

This is all about Creo, not sure about Windchill as Windchill is out of my expertise.

View solution in original post

8 REPLIES 8
MartinHanak
24-Ruby III
(To:tperry)

Hi,

what action is user doing ?

MH


Martin Hanák

Hi,

-        He is checking-out the drawing and part from Windchill.

-        Delete the model from the .prt file

-        Append a step into the same .prt file

-        Assign new material from a library

-        Model check, to assign missing tolerance, and various notes.

-        Save and upload

              o   Failed upload:   “The value for MASS_GR cannot be changed” shows at this point

Note:

-        We have made sure the material properties agree with standard before and after error.    (Millimeter kilogram second)

-        The material library is our standard and has been viewed for proper units, in the event units was recently changed.

-        Even “save and upload” as checked-out, with no changes results in the same upload error.

Hopefully this offers some good information , and I appreciate your help.

Kind regards,

Tim

Mahesh_Sharma
22-Sapphire I
(To:tperry)

Tim,

Is it in all of the files or data specific? Can you upload a sample file to look?


See attached for the .prt file

Mahesh_Sharma
22-Sapphire I
(To:tperry)

Tim,

Parameter Mass_GR is relation based.

Try updating mass properties using File > Prepare > Change Mass properties > Generate report and try Save and upload.

This is all about Creo, not sure about Windchill as Windchill is out of my expertise.

Nice ... Thank you Mahesh!

Generating the report allowed the file upload without the error.

I appreciate the help.

Tim

SOLVED!!!

Mahesh_Sharma
22-Sapphire I
(To:tperry)

Tim,

I would appreciate if you can mark the appropriate reply to post as correct answer.

Thanks for the suggestion.

I am a first time requester and will follow this process in the future.

Nice forum.

Thanks again for the input.


Announcements
Business Continuity with Creo: Learn more about it here.

Top Tags