GPost of CREO for machine DMG-Mori NLX2500Y700

[bnguyen-2]

Dear

Help me check GPost of CREO for machine DMG-Mori NLX2500Y700?

Ref of machine http://br.dmgmori.com/products/lathes/universal-lathes/nlx/nlx2500+700

*note: This Lathes machine available with C,B axis & X, Y, Z axis

Thanks advance your support.

This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

[dm-3]

Binh,

You forget to mention the controller.

--

Dhinesh

[bnguyen-2]

Dear Mr. Dhinesh

Controller is Misubishi

Thanks

[dm-3]

Binh,

Although you probably will not find a post that you can download and that works perfectly without editing, there are few things that might help you out. The link below will bring you to the PTC GPOST Central Resource page. Although this site has not been updated in years (2004-2005), it still has a lot of useful information regarding post processors. There is a link on the bottom of this page titled "PRODUCTION POSTPROCESSORS". This will bring you to a page that has a few dozen downloadable posts. These are a great place to start and you may find one that gets you 90% of the way there. There are also a lot of useful training presentations and other files, so make sure to browse through all of the links.

http://support.ptc.com/cs/cs_26/howto/ncgp4903/ncgp4903.htm

--

Dhinesh