cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - When posting, your subject should be specific and summarize your question. Here are some additional tips on asking a great question. X

Translate the entire conversation x

Data update slow over Modbus TCP ip

SG_10725116
2-Explorer

Data update slow over Modbus TCP ip

Hello all,

 

Recently I have configured 1 channels with 15 devices in that over modbus tcp/ip, which scan the data from fuji HMI. The hmi is programmed to send the data or parameter on every second to kepserver over Modbus tcp/ip, 

 

The problem I am facing not regarding the connectivity  but the data is not updating on kepserver on every seconds. It gets refresh nearly after 30-40 seconds. Which is heading me in a problem from further scada system and its data logging. I am unable log the data at required interval. 

 

Kindly suggest what can be the solution to get rid of the problem for this,

 

 

Reagrds 

Bharat Vinchwekar 

ACCEPTED SOLUTION

Accepted Solutions

Hi,

Please take a look at the following article as it may help resolve your issue:

https://www.ptc.com/en/support/article/CS292754

If you are prompted to log in to view the complete article, you can use your MyKepware login credentials.

View solution in original post

1 REPLY 1

Hi,

Please take a look at the following article as it may help resolve your issue:

https://www.ptc.com/en/support/article/CS292754

If you are prompted to log in to view the complete article, you can use your MyKepware login credentials.

Announcements


Top Tags