Kepware OPC Tag Import Syntax Issue With "" in CSV

[JK_10744682]

Hi all,

I am trying to import some OPC UA tags into Kepware via CSV. I have an address that looks like the below which is the address value in my CSV file:

ns=3;s="DB31 Data Fixture"."CurrentMoldType"

But when I import it the address ends up like this in Kepware:

I can't seem to figure out why it is ending up with "" in Kepware when it isn't like that in my CSV

[MRohilla]

Greetings,

We need a case open for this reported issue. Please upload the CSV file that you are uploading into the project so that we can investigate further. 

Regards,

Mohit 

[MKhatri · Accepted solution]

Hello,

I hope this email finds you well. I wanted to share with you an article that outlines the procedure for importing CSV files into Kepserverex.

We have included examples to help guide you through the process. You can access the article here: https://www.ptc.com/en/support/article/CS341300

Additionally, please take a look at the additional document for more detailed information.

Let me know if you have any questions or need further assistance.

Regards,

Mohit