cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Creo Drawing Program to utilize the Same Engineernig Drawing for both US and Europe Manufacturers / Same Engineering drawing with both First angle and Third angle Projection

PARTHIBAN_K
Moonstone

Creo Drawing Program to utilize the Same Engineernig Drawing for both US and Europe Manufacturers / Same Engineering drawing with both First angle and Third angle Projection

Can you use the same engineering drawing for the US and Europe Manufacturers?

Most of the US Manufacturers follows the First angle projection and Most of the Europe Manufacturers follows the Third angle projection.

If we have to send the same casting drawing to the both supplier with their requirement what we should do?

Creating multiple drawings for the same model is a bad Idea. During changes in the model causes update required for all the drawings

So create the same drawing to use both First angle and the Third angle projection

See this link for the article, how to utilize the drawing program to maintain first angle and the third angle projection with the same drawing

http://jkparthiban.com/index.php/2017/04/15/creo-drawing-program-utilize-drawing-us-europe-manufactu...

Parthiban Kannan

href="https://www.linkedin.com/in/parthiban-kannan/" target="_blank"
2 REPLIES 2

Re: Creo Drawing Program to utilize the Same Engineernig Drawing for both US and Europe Manufacturer


Most of the US Manufacturers follows the First angle projection and Most of the Europe Manufacturers follows the Third angle projection.


This is wrong! Most US drawings are Third angle and european drawing are First angle.

Re: Creo Drawing Program to utilize the Same Engineernig Drawing for both US and Europe Manufacturer

Thank you so much

Announcements