Creo 5.0 Student License

[Gregchop]

I followed the directions for install and license, however when I try to launch any of the Creo Application they return a license error, even though the license is located correctly. I would note that Creo Direct on launch just terminates without message where the other 4 applications return a license error, when I select OK the application(s) close

[Gregchop]

Seems you dont have a student license for 5.0 is that correct ?

[FraRob]

Hi, I have the same problem: I have both installed Creo 5.0 following the instructions provided from PTC and gone through the configuration process described by PTC in the "School Configuration Guide", although when I run the program it shows me a message that says: "License request failed for feature". I'm not an expert of computers and I have no clou what that means, if you know what the problem is could you please tell me and maybe suggest me what I can do to solve it?

Thank you

[ptc-4053401]

I have the same license error. Has anyone found a solution?

[MartinHanak]

Hi,

if you want to install Creo Parametric 5.0, then:

1.] remove all files from C:\ProgramData\PTC\Licensing directory (move them into other directory)

2.] install Creo Parametric 5.0 and use Product code BE500806EDSTUDENTEDK12 to get Student license.

[Mbhush]

Thanks for providing solution. Awesome it worked...!!!!

[gwilso210]

Didn't work for me unfortunately

[eraytipton]

This license key did not work for me. Do you have any other solutions or keys?

[MartinHanak]

Hi,

did you follow procedures described in following documents ?

https://apps.ptc.com/schools/references/install_creo5_unistudent_standard.pdf
http://apps.ptc.com/schools/references/install_creo5_schools_standard.pdf

What error message did you get ?

[gwilso210]

I spent three days emailing an advisor and with a specific code generated just for me and about 20 installations later with different licenses and my firewall off, I finally got the student version to work. (There was a conflict with a previous version of the software).

My project is due in two weeks and the student version is so limited that I can't use the features I need anyway. The student version files aren't backwards compatable, so version 5 files at home cannot be loaded on version 3 at university (not useful).

However, to everyone who helped me. I thank you all, this issue is resolved.

If you have any questions get in touch with Martin Hanak, hopefully he can help.

Good Luck

[gwilso210]

So, to update this thread. Currently doing my dissertation, need the use of CREO at home and my computer updated a few days ago. CREO has decided it too will need updating... I'm now back to where I was 2years ago. The software has been improved to the latest version, however, I now can't use it at home for my dissertation because the license once again won't work. I also can't use it at Uni because of the coronavirus which isn't helpful. So uninstalled and re-installed it several times. Get a "success" with regards to my student license, however, once I load the software it tells my license isn't suitable and closes. Any help would be more than welcome.

@MartinHanak

[MartinHanak]

---

@gwilso210 wrote:

So, to update this thread. Currently doing my dissertation, need the use of CREO at home and my computer updated a few days ago. CREO has decided it too will need updating... I'm now back to where I was 2years ago. The software has been improved to the latest version, however, I now can't use it at home for my dissertation because the license once again won't work. I also can't use it at Uni because of the coronavirus which isn't helpful. So uninstalled and re-installed it several times. Get a "success" with regards to my student license, however, once I load the software it tells my license isn't suitable and closes. Any help would be more than welcome.

@MartinHanak

---

Hi,

I can help you if you provide exact detailed information.

1.] What Creo version do you want to use ?

2.] Upload files located in C:\ProgramData\PTC\Licensing directory

3.] Publish error message displayed after starting Creo.

[gwilso210]

Spent an hour or two uninstalling, reinstalling and requesting new licenses finally got it to work, thanks and I appreciate the support.

[VishalY]

1.version 5.0.4.0

3.: "License request failed for feature".

Invalid feature name:[Featwre_Name]

2.file notgeting upload i dont know why

But it's name is -

BE500806EDSTUDENTEDK12_license

And the file is empty if i open it.

Even i tried with id
BE500806EDSTUDENTEDK12_license

With both id ,while setup process in license identification---->license summary the status of these license file source shows Invalid file or format

[MartinHanak]

---

@VishalY wrote:

1.version 5.0.4.0

3.: "License request failed for feature".

Invalid feature name:[Featwre_Name]

2.file notgeting upload i dont know why

But it's name is -

BE500806EDSTUDENTEDK12_license

And the file is empty if i open it.

Even i tried with id
BE500806EDSTUDENTEDK12_license

With both id ,while setup process in license identification---->license summary the status of these license file source shows Invalid file or format

---

Hi,

1.]

Before you start Creo installation, you have to empty C:\ProgramData\PTC\Licensing directory

Please read http://apps.ptc.com/schools/references/install_creo5_schools_standard.pdf document.

2.] 

If license file is empty, then the license generator has trouble detecting the appropriate network card (I guess).

Open Command prompt window, run ipconfig /all > ip.txt command, zip ip.txt file and upload ip.zip file. I can check its contents.

[MartinHanak]

Also please upload std.out file created in Creo startup directory.

[udayn541]

thank you boss

[dheeneshwaran]

yes

[abhishek2]

Dear sir

We need of creo 5.0 student license. which we are preparation of design so please provide dear Sir/Mam student license

[MartinHanak]

---

@abhishek2 wrote:

Dear sir

We need of creo 5.0 student license. which we are preparation of design so please provide dear Sir/Mam student license

---

Hi,

download 4 GB zip from https://support.ptc.com/appserver/auth/it/esd/academicFree.jsp page (you have to create PTC account).

Read following documents carefully

http://apps.ptc.com/schools/references/install_creo5_schools_standard.pdf 

https://apps.ptc.com/schools/references/install_creo5_unistudent_standard.pdf 

[abhishek2]

yes

[VladimirN]

Please submit your request in "Academic Support Request" form: Academic Case Logger

[v-k-s]

just do this 

1) uninstall creo parametric 5.0 (only) and 

2) remove licencing files permanently from your machine , from recycle bin also 

2) go to setup again and start installing 

3) in licencing use code:- BK500806ED0790-Y3M9-4RW5 

4) enter your ID and password and click install 

restart your machine 

good to go 

let me this worked for u or not 

[eraytipton]

Worked for me, thank you for the help!

[rohitpremoo7]

licence has changed for creo 5.0. Use "BK500806ED0790-Y3M9-4RW5" and follow same process from starting. It will work.