cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - If community subscription notifications are filling up your inbox you can set up a daily digest and get all your notifications in a single email. X

3gb switch

wfalco
16-Pearl

3gb switch

All,

Is setting the 3gb switch required for Windows 7?

If so - can you point me to instructions on how to do this?

WayneF
4 REPLIES 4
wfalco
16-Pearl
(To:wfalco)

Forgot to mention - this is for 32 bit.


wfalco
16-Pearl
(To:wfalco)

Every on agrees that 64 does not need it. Do I need it on 32 Win 7? On
Dell Latitude E5510.

I'd like to add more memory, but need to know if the switch needs to be
set so the new memory will be recogonized.


gwalker
12-Amethyst
(To:wfalco)

A 32-bit system will recognize up to 4GB of RAM regardless of the 3GB switch setting. Actually, on XP, it will show 3.5GB in the properties even though the system has 4GB.
I recommend NOT setting the 3GB switch if you are running Windows 7 32-bit with 4GB of RAM or less. On Windows XP, the 3GB switch can cause some graphics problems that most users would not appreciate.
If you need more than 4GB of RAM you MUST have a 64-bit system.
TomU
23-Emerald IV
(To:wfalco)

The 3GB switch IS needed if you want any one process to be able to access more than 2GB of virtual memory (on a 32 bit machine). From another website:

To enable the 3GB switch on Windows Vista™ or Windows 7:
1. Right-click Command Prompt in the Accessories program group of the Start menu. Click Run as Administrator.
2. At the command prompt, enter "bcdedit /set IncreaseUserVa 3072"
3. Restart the computer.
To disable the 3GB switch:
1. Right-click on Command Prompt in the Accessories program group of the Start menu. Click Run as Administrator.
2. At the command prompt, enter "bcdedit /deletevalue IncreaseUserVa"
3. Restart the computer.

Announcements
NEW Creo+ Topics: PTC Control Center and Creo+ Portal


Top Tags