cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Need help navigating or using the PTC Community? Contact the community team. X

Creo 3.0 Surface Free Form

CoreySusie
4-Participant

Creo 3.0 Surface Free Form

What happened to the Surface Free Form and Solid Free Form commands in Creo 3.0?  Is there a config or hidden config to bring them back?

 

It was available in Creo 2.0

 

Is there a new equivalent version of this feature?


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
1 ACCEPTED SOLUTION

Accepted Solutions

Hi Corey,

It appears that these options have been obsoleted in Creo Parametric 3.0, but you can still access them by setting the config option enable_obsoleted_features to yes.  Once you do that, you will be able to search for Surface Free Form and Solid Free Form in the Command Search or add them to a user-defined tab from the Customize Ribbon.

You can get more information via the following article:

CS180186 - Surface Free Form command under Model > Surface is not available in Creo Parametric 3.0

If you don't have a user name and password to login, you can create one here.

Thanks,

Amit

View solution in original post

1 REPLY 1

Hi Corey,

It appears that these options have been obsoleted in Creo Parametric 3.0, but you can still access them by setting the config option enable_obsoleted_features to yes.  Once you do that, you will be able to search for Surface Free Form and Solid Free Form in the Command Search or add them to a user-defined tab from the Customize Ribbon.

You can get more information via the following article:

CS180186 - Surface Free Form command under Model > Surface is not available in Creo Parametric 3.0

If you don't have a user name and password to login, you can create one here.

Thanks,

Amit

Top Tags