creo simulate save error

[ptc-5312052]

hi

   I am getting a model save error while i am saving the simulate model. any solutions

[gkoch]

I found a similar case in our internal database: The model had been sent to PTC Technical Support for investigation and R&D found out that the model had some data corruption, that needed to be fixed in the model file.

Unfortunately the cause for the data corruption never could be found.

So I recommend to either:

• Start with an older version that does not have the issue
• Send the model to PTC TS to get it fixed

[Bogdan]

The error will come up if you use "SAVE AS" in the Simulation environment.

To find out what case the error will be almost impossible.

Use a older version like the other guys recommended.

Take care!

Bogdan