Input/Output XMCD, MCD Converter MathCAD Express Prime7.0.0.0

[HS_3223800]

Users are not able to access additional content in their MathCad application - Input/Output > XMCD/MCF converter. Need assistance to determine if this is a licensing issue or an application issue.

[LucMeekes]

There's no need to post twice. Once is enough.

To your issue:

The converter needs to be installed explicitly. You have to tick the option during installation, it is Off by default.

To correct it, de-install and re-install, while not forgetting to tick the option On.

Success!
Luc

[VladimirN · Accepted solution]

Starting from the 7th version of Mathcad Prime you can use the built-in converter (before the installation process, it is necessary to select it among the installation components).

[anursingh]

Hi @HS_3223800,

I wanted to see if you got the help you needed.

If so, please mark the appropriate reply as the Accepted Solution. It will help other members who may have the same question.
Please note that industry experts also review the replies and may eventually accept one of them as solution on your behalf.
Of course, if you have more to share on your issue, please pursue the conversation. 

Thanks,
Anurag