Creo Parametric Tips

Start a topic

Close X

May 24, 2024

Mar 25, 2024

Dec 4, 2023

Oct 3, 2023

Aug 25, 2023

Jul 20, 2023

Hello everyone and welcome to blog post #14 in this multibody blog series. Today’s blog is about the use of the “Intersect” Feature to create the intersection curve between two bodies (or quilts) You might remember that Creo 7.0 introduced Boolean Operations to perform merge, subtract and intersect operations between bodies. These operations act upon a “target” body which is modified during the Boolean operation. The resulting object there is still a body. In order to create an intersection curve, we therefore cannot use the Body Boolean operations feature, but will use the “Intersect” feature within the “Editing” group. Starting with Creo 7.0, this “Intersect” feature allows to select bodies as references. In this first example, we select Body 1 (yellow box) and Body (grey cylinder) and get the full intersection curve as a result. This is illustrated in the image below. (Result is shown in small overlay image) Note that you could also select just a single body in combination with one or multiple surfaces to get a partial intersection curve. In the example illustrated below we create the intersection curve based on a selection of the grey body 2 and 2 selected (red) surfaces of the yellow body 1. Finally, what could this intersection curve be used for? Intersection curves allow for a fast creation of a quilt representing the surface contours that are covered by the intersection (in particular for closed curves). You can for example use the curve generated in the first example as input to create a designated area. The image below shows the “Designated Area” feature with the closed intersection curve as input when placed on the yellow Body 1. The resulting quilt is illustrated in the small additional image. Starting with Creo 9.0 and higher you can also divide/split these surfaces based on those curves. Watch the video below to see an example use case of this. And as I was at video creation, I thought I could also re-emphasize the usage of Body visibility controls The usage of intent surfaces created by features such as “Divide Surface” and “Boolean Operations” Thanks for reading. I hope it was informative. If you liked it, give it a Kudo. Back to Creo Parametric- Multibody Home: Start Here! Enjoy!....Martin

May 30, 2023

Hello everyone and welcome to blog post #20 in this multibody blog series. Today’s blog is about illustrating a use case around geometry re-use that became enabled with the new appearance (and reference) propagations in Creo 10.0’s Body Boolean and Split Body features. (see Multibody: Appearance and Reference Propagation for Boolean Operations (ptc.com) ) In essence we added two new options to Body Booleans as shown in the image below. Those options allow you to control color propagation and reference propagation. That means for the below example, that when you subtract the orange and white bodies from the green eyelet part, we can propagate the color to the corresponding mating cut faces, and transfer references from the original to the new surfaces, so that for the attached annotations automatically move to the cut surfaces. So, what is this good for? An example use case for this might be a scenario where you have standardized cut-outs for a connector where you model the cut-outs as fully detailed and annotated bodies in a library part. These bodies will then be inserted along with their annotations into the connector part where we then subtract and pattern them. During the subtract operation we can then not only create the target cut-out geometry, but also have the colors and the annotation references be transferred to the cut-out surfaces. All the sematic references of these annotations would thus continue to show in a semantic query for selected annotations. Here you see a video illustrating the workflow for the above example in Creo 10.0 Thanks for reading. I hope it was informative and this is a valuable use case for you. If you liked it, give it a Kudo. Back to Creo Parametric - Multibody Home: Start Here! Enjoy!....Martin

May 30, 2023

Feb 8, 2023

Feb 1, 2023

Nov 29, 2022

Oct 26, 2022

Aug 3, 2022

Jul 22, 2022

Jul 21, 2021

We're offering a series of quick Creo tutorials presented by our expert product managers. Each of these tutorials are just a few minutes long. These bite-sized tips are a perfect opportunity to learn a new skill or ensure you're following best practices. Below you’ll find about 15 minutes of video how-tos to help you boost your CAD know-how. Let's get started. Shrinkwrap All Quilts When you create a Shrinkwrap feature, by default, Creo automatically analyzes all components in the assembly and determines which ones will be included in the shrinkwrap. This could result in subassembly quilts being excluded. However, you can use the Search Tool to help find and select all quilts in the assembly. In this tutorial, Arnaud van de Veerdonk, Creo Product Manager, shows you how to use shrinkwrap to copy all quilts from all models in an assembly. Watch the tutorial now: Work with Custom Manikin Postures You can test designs for ergonomic compatibility and other human-centric requirements using a Creo Manikin. If you can't find a manikin that fits your design scenario, you can create a custom posture for your manikin. Then, you can save the posture, use it for an analysis or apply it to any other manikin later. In this tutorial, Arnaud van de Veerdonk explains how to create, store, and apply custom manikin postures. Here's how to do it: CNC Drilling on Imported Geometry Simplify your work creating hole-making sequences over imported geometry with tips from Creo Product Manager, Jose Coronado. In this tutorial you'll see how to easily create CNC drilling sequences by: Creating drill holes on imported geometry (no axes needed). Using the Auto Depth option so you don't need to manually select the end of each set of holes. Watch the tutorial: For more tips from our experts, watch the Tips from the Creo Masters main page.

Apr 30, 2020

Ready for another 15 minutes of Creo tips from our product manager experts? In the videos below, you’ll see how to avoid pitfalls when adding components to a Model Tree, a faster way to reach your AR experiences, and tips for getting embossed text on curved surfaces. Drag-and-Drop Without Restructuring the Model Tree Normally when you drag-and-drop parts and subassemblies in the Model Tree, they're moved to wherever you drop them. However, restructuring components can lead to unwanted changes in the assembly structure. However, you can change this behavior so Model Tree components are not restructured when you drag-and-drop components. In this tutorial, Arnaud van de Veerdonk, Creo Product Manager, shows you how: Bookmark Your AR Experiences Reviewing an augmented reality (AR) experience of a Creo model over and over? Stop opening that experience using the link in your email. Instead, save a few steps by creating a bookmark that automatically launches the AR experience. In this short tutorial, Creo Product Manager, Luke Westbrook shows you how to create a bookmark on your mobile device to quickly open an AR experience. See how to do it: Add Embossed Text to a Cylindrical Surface If you've ever designed a text element to emboss on a curved part, you know that getting it just right can be a mind bender. Demystify the process. Watch the tutorial below to see how to create embossed text on a cylindrical surface in Creo Parametric with as few clicks as possible. In the tutorial, Mark Fischer, Sr. Director of Product Management shows you how to: Wrap text around a curved surface. Turn the text into a designated area (a quilt that can be used to indicate areas for close examination or a special treatment), create an offset of the designated area, and then use the thicken feature to create the embossed text. Edit the appearance of the embossed text (defining the size, font, angle, etc.). Edit the definition for the text (defining the size, font, angle, etc.). Watch how it's done here: For more tips from our experts, watch the Tips from the Creo Masters main page.

Apr 16, 2020

A not-quite-right user interface can be a real nuisance day after day. But, an interface that’s just right for Sally might be all wrong for Tomas. Achieving true “one-size-fits-all” status is probably impossible. That’s why the Creo Parametric model tree is customizable. After all, your software is kind of like that Journey song … you know … “Any way you want it, that’s the way you need it. Any way you want it.” Here are some tips for getting the model tree just how you want it. Pick Your Columns and Column Widths. Do you need to see more parameters in the model tree? Or, do you need to minimize columns and expand the graphics area, so you have more room to work? No problem. Here’s how to do it. At the top of the model tree, click Settings and select Tree Columns. Add/remove displayed columns. Customize the width of the model tree, as well as the width of the other columns, using the dialog window (shown below) or by dragging the column separators in the model tree after you click Apply to add any new columns. You’ll notice the model tree itself is defined as a column that can’t be removed from the list of displayed columns (see below). And you can set its width in the same way you set the width of individual columns. Additionally, you can quickly switch between showing and hiding the additional columns. Hiding columns can be useful when you want to shrink the size of left pane and maximize the graphics area. Set Display Filters Of course, some standard features, suppressed objects, and annotations appear in the model tree by default. However, did you know you can customize these model tree display filters for part and assembly modes? Here’s how: At the top of the model tree, click Settings and select Tree Filters. Use the dialog window to select features to display in the model tree. Saving Your Model Tree Customizations Model tree column settings, including column width, and model tree display filters are automatically stored, by mode, in the creo_parametric_customization.ui file. These settings load automatically when you open a new Creo Parametric session. Model tree settings can be imported and exported in user customization file types (*.ui). Want to see more? Watch the video below You don’t need to worry about messing up your current settings when you make changes to the model tree. You’ll notice several places where you can reset default settings when needed. You can even apply the reset to the current mode or all modes.

Jan 27, 2020

LiveWorx and PTC/User are now offering an entire day focused on Creo and Windchill content with the addition of CAD & PLM Technical Day on Monday, June 10. This is an additional 25 breakout sessions with all of the Creo and Windchill tips, tricks and insights necessary to get the most out of your PTC Products. Here’s what you need to know: You can take a look at what to expect for sessions here CAD & PLM Technical Day is included with your purchase of an All Access or DeluX Pass Explorer Pass holders can add it on for an additional cost of $250 until March 27 and $350 through June 13 If you are already registered it is not too late to add this to your registration: Log In to your account Enter username and password Select “Registration” Scroll down and click “Purchase Additional Event Offerings” and add the CAD & PLM Technical Day to your account Seats are filling fast for this dedicated content, don’t miss out on learning from some of our Creo and Windchill super users (and fellow Community members) on best practices and how other organizations are utilizing these solutions. Please email concierge@liveworx.com if you have any questions.

Feb 27, 2019

Featured Article

Welcome to Creo Tips and Techniques Series Main Presenters: Ryan Butcher (Technical Specialist, Fellow) and Lino Tozzi (Technical Specialist, Fellow) Below you will find all the related webcast recordings and recommended additional learning resources. Webcast Title Description Learn Online Classes/Resources 1 Learn Online Classes/Resources 2 Creo Multi-Body Design Creo Multi-Body Design Creo: Multibody Design Class Info Creo and Augmented Reality Creo and Augmented Reality Augmented Reality Class Info Creo: Generative Design Automated geometry creation using design criteria Creo: Generative Design Class Info Creo Generative Design Tutorials Creo: Simulation Live Real time simulation during design Creo Simulation Live Class Info Creo Simulation Live Tutorials Creo: Flexible Modeling Direct modeling features to edit imported data Creo: Flexible Modeling Class Info Creo Flexible Modeling Tutorials Ansys Simulation Ansys Simulation Ansys Simulation Class Info Harness Design Used with cabling to create harness mfg drawings Cable Routing & Harness Class Info Cable Routing & Harness Class Info Manufacturing Automation Tools for mfg efficiencies Mfg Training Class Info Additive Manufacturing Design for 3D printing Additive Manufacturing Class Info Advanced Assembly Advanced techniques for assemblies Creo Advanced Assembly Class Info Behavioral Modeling Automated design intent Behavioral Modeling Class Info Surfacing Tips & Techniques Core Surfacing-ISDX-Freestyle Surfacing Class Info ISDX Class Info Creo Mechanism Dynamics Creo Motion analysis Creo: Assembling with Kinematics Connections Class Info Creo: Mechanism Design & Analysis Class Info Mathcad Express Mathcad Express Mathcad Tutorials Design Exploration & Intelligent Fastener (IFX) Explore multiple design concepts; automatic assembly of fasteners Design Exploration Tutorials Intelligent Fastener Tutorials Tool Design/Mold Analysis Mold design and flow analysis Mold Design Tutorials High Speed Machining High Speed Machining Axis High Speed Milling Info Prismatic & Multi-Surface Milling Standard mfg in Creo Creo: Introduction to Milling Class Info Creo: Introduction to Turning - COMING SOON Creo Unite & Import Data Doctor MultiCAD design collaboration Creo Unite Technology Tutorials Plastic Part Design Plastic Part Design Plastic Part Design Overview Large Assembly Management Top Down design Creo: Using Assembly Skeletons for Top-Down Design Class Info Creo Sheetmetal Design Creo Sheetmetal Design Creo Sheetmetal Class Info Creo Sheetmetal Tutorials Reverse Engineering Use scan data to create new part designs Advanced Modeling Techniques Techniques for Sketcher, Selection, Sweeps, Deformation, Blends Creo Simulate Advanced Creo based Advanced Simulation Creo Simulate Advanced Tutorials Creo Render Studio Photo render your models Creo Render Studio Tutorials Creo Model Based Definition 3D drawings (model centric designs) Creating Annotations using MBD Modifying & Publishing Annotations using MBD Creo Automation Creo based automation tools: Macros, Programming, Options Modeler Creo Automation Tutorials Creo Manikin Ergonomic studies with manikins Creo Manikin Tutorials Creo Schematics Routed Systems design for all types of schematics Creo Schematics Class Info Creo Schematics Tutorials Creo View Interference Lightweight view of CAD designs Creo View Tutorials Creo Clearance & Creepage Analysis Clearance and Creepage analysis for electrical designs What's New in Creo 8 & 9 What's New in Creo 8 & 9 What's New in Creo 8 & 9 Tutorials What's New in Creo 8 & 9 Blog ECAD/MCAD Collaboration MCAD designer and ECAD designer collaboration Data Exchange Tutorials PTC University PTC Creo training Advanced Framework Extension Design of steel structures Advanced Framework Extension Tutorials Advanced Framework Ext Tutorial Creo Flow Analysis Simerics based CFD Creo Flow Analysis Tutorials Creo Ansys Simulation Full Ansys based solution embedded in Creo Creo Ansys Simulation Class Info Creo Ansys Simulation Tutorials What's new in Creo 9 What's new in Creo 9 What's New in Creo 9 Piping Design 3D routing of piping design Piping Design Tutorial Get Started with Creo Parametric Piping Creo Layout & 2D Sketching Axis concentric design layout in 2D Creo Layout & 2D Sketching Progressive Die Design Design of sheetmetal stamped parts About Progressive Die Design Virtual Interconnect Libraries for schematic design Virtual Interconnect Design Automation for Creo Partner automation tools CadActive Creo Automation with Smart Assembly Partner automation tools SIGMAXIM DFMPro Design for mfg (Partner) HCL DFMPro Creo Option Modeler Design optionality in Creo Assemblies Creo Options Modeler What's New in Creo 10 What's New in Creo 10 What's New in Creo 10 Tutorials Creo Ansys Simulation Full Ansys based solution embedded in Creo Creo Ansys Simulation Tutorials Creo Composites Creo Composites Creo Composite Tutorials Creo: Things You Might Know But Probably Don't Creo: Things You Might Know But Probably Don;t Creo Tutorials Multi-Axis Milling with Creo NC Multi-Axis Milling with Creo NC Intro to Milling Creo Additive Manufacturing Creo Additive Manufacturing Intro to Additive Manufacturing Creo Patterns Creo Patterns Creo Patterns Tutorials Sketcher Sketcher Sketcher Tutorials Turning Turning Creo 11 Creo 11 Resolving Geometry Issues Resolving Geometry Issues in Creo Parametric Creo: Part Design Intent and Reference Management Creo: Assembly Design Intent and Reference Management Product Insights Product Insights Solid Model Tools in Creo NC Solid Model Tools in Creo NC Rapid New Product Development Using Generative, Additive and Simulation Rapid New Product Development Using Generative, Additive and Simulation You may also find similar content in our East Coast Webcast Series series.

Jul 19, 2021

Featured Article

Welcome to Creo Tips & Techniques Webcast Series (East Coast) Main Presenters: Lino Tozzi (Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow) Below you will find all the related webcast recordings and recommended additional learning resources. Webcast Title Description Learn Online Classes/Resources 1 Learn Online Classes/Resources 2 Creo Multi-Body Design CReo Multi-Body Design Creo Multi-Body Class Info Creo Simulation Live Real time simulation during design Creo Simulation Live Class Info Creo Simulation Live Tutorials Creo Generative Design Automated geometry creation using design criteria Creo: Generative Design Class Info Creo Generative Design Tutorials Creo Flexible Modeling Direct modeling feature to edit imported data Creo: Flexible Modeling Class Info Creo Flexible Modeling Tutorials Creo Advanced Assembly Advance techniques for assemblies Creo Advanced Assembly Class Info Creo Behavioral Modeling Automate design intent Creo Behavioral Modeling Class Info Creo Additive Manufacturing Design for 3D printing Additive Manufacturing Class Info Creo Tolerance & GD&T Creo tolerance & GD&T Creo EZ Tolerance Analysis Tutorials Creo GD&T Advisor Tutorials Creo Surfacing Creo Surfacing-ISDX Surfacing Class Info ISDX Class Info Creo Surfacing continued Creo Surfacing-Freestyle Freestyle Class Info Creo Cabling/HMX Creo Cabling/HMX Creating Harnesses & Routing Cables 1 Creating Harnesses & Routing Cables 2 Creo Mechanism Dynamics Creo Mechanism Dynamics Creo: Assembling with Kinematics Connections Class Info Creo: Mechanism Design and Analysis Class Info Mathcad Express Mathcad Express Mathcad Tutorials Design Exploration & Intelligent Fastener (IFX) Explore multiple design concepts for automatic assembly of fasteners Design Exploration Tutorials Intelligent Fastener Tutorials Tool Design EXT with Mold Analysis Mold design and flow analysis Mold Design Tutorials Prismatic & Multi-Surfaces Prismatic & Multi-Surfaces Creo: Introduction to Milling Class Info Creo: Introduction to Turning - COMING SOON Creo Unite and Import Data Doctor MultiCAD design collaboration Creo Import Data Doctor Class Info Creo Unite Technology Tutorials Plastic Part Design Plastic Part Design Plastic Part Design Large Assembly Management Top Down design Creo: Using Assembly Skeletons for Top-Down Design Class Info Creo Sheetmetal Design Creo Sheetmetal Design Creo Sheetmetal Class Info Creo Sheetmetal Tutorials Reverse Engineering Use scan data to create new part designs Advanced Modeling Techniques Techniques for Sketcher, Selection Sweeps, Deformation, Blends Creo Simulate Advanced Creo based advanced simulation Creo Simulate Advanced Tutorials Creo Render Studio Photo render your models Creo Render Studio Tutorials Creo Parametric Design for Model-Based Definition 3D drawings (model centric designs) Creating Annotations using MBD Modifying & Publishing Annotations using MBD Creo Automation Creo based automation tools: Macros, Programming, Options Modeler Creo Automation Tutorial Creo Data Migration Creo Data Migration Creo Manikin Ergonomic studies with manikins Creo Manikin Tutorials Creo Schematics Routed Systems design for all types of schematics Creo Schematics Class Info Creo Schematics Tutorials Creo View Overview/Interference Lightweight view of CAD designs Creo View Tutorials Creo Clearance & Creepage Analysis Clearance and Creepage analysis for electrical designs Creo Clearance & Creepage Learning Link What's New in Creo 8 & 9 What's New in Creo 8 & 9 What's New in Creo 8 & 9 Tutorials What's New in Creo 8 & 9 Blog ECAD/MCAD Collaboration MCAD designer and ECAD designer collaboration Data Exchange Tutorials PTC University PTC Creo training Advanced Framework Extension Design of steel structures Advanced Framework Extension Tutorials Advanced Framework Ext Tutorial Creo Flow Analysis Creo Flow Analysis Creo Flow Analysis Tutorials Creo Ansys Simulation Full Ansys based solution embedded in Creo Creo Ansys Simulation Class Info Creo Ansys Simulation Tutorials What's New in Creo 9 What's New in Creo 9 What's New in Creo 9 Creo Piping Design 3D routing of piping design Piping Design Tutorial Get Started with Creo Parametric Piping Creo Layout & 2D Sketching Axis concentric design layout in 2D Creo Layout & 2D Sketching Creo Progressive Die Design Design of sheetmetal stamped parts PDX Help Documentation PDX Home Page on B&W's Site Virtual Interconnect Libraries for schematic design Virtual Interconnect Design Automation for Creo Partner automation tool CadActive Creo Automation with Smart Assembly Partner automation tool SIGMAXIM DFMPro Design for Manufacturing (Partner) HCL DFMPro Creo Options Modeler Design optionality in Creo assemblies Creo Options Modeler Tutorial What's New in Creo 10 Whats New in Creo 10 What's New in Creo 10 Tutorials Creo Ansys Simulation Creo Ansys Simulation Creo Ansys Simulation Tutorials Creo Composites Creo Composites Creo Composites Tutorials Creo: Things You Might Know But Probably Don't Creo Things you Might Know But Probably Don't Creo Tutorials Multi-Axis Milling with Creo NC Multi-Axis Milling with Creo NC Creo Multi-Axis Milling Tutorials Additive Manufacturing Additive Manufacturing Intro to Additive Manufacturing Creo Patterns Creo Patterns Creo Patterns Tutorials Sketcher Sketcher Sketcher Tutorials Turning Turning Creo 11 Creo 11 Resolving Geometry Issues Resolving Geometry Issues Creo: Part Design Intent and Reference Management Creo: Assembly Design Intent and Reference Management Product Insights Product Insights Solid Model Tools in Creo NC Solid Model Tools in Creo NC Rapid New Product Development using Generative, Additive, and Simulation Rapid New Product Development using Generative, Additive, and Simulation You may also find similar content in our West Coast Webcast Series.

Jul 28, 2021

Creo Parametric Tips

Creo "What's New in Creo 11" Tips & Techniques Session Recording (West Coast)

Creo "Sketcher" Tips & Techniques Session Recording (West Coast)

Creo Additive MFG Tips & Techniques Session Recording (West Coast)

Creo: "Things You Might Know, but Probably Don't" Tips & Techniques Session Recording (West Coast)

Creo Composites Tips & Techniques Session Recording (West Coast)

What's New in Creo 10 Tips n' Techniques (West Coast)

Multibody - How to create a body intersection curve and what might it be good for?

Multibody – A Geometry Re-use Use Case that became possible with new capabilities in Creo 10.0

Creo Automation with Smart Assembly

Creo Parametric Design Automation Tips and Techniques

Creo Parametric 9.0 What's New Tips and Techniques

Advanced Techniques for Creating Rounds in Creo Parametric

Learning Creo Parametric Tips and Techniques (Learning.ptc.com)

Creo Parametric 8 & 9 Update Tips and Techniques

Creo Advanced Assembly Tips & Techniques Session Recording (West Coast)

Shrinkwrap All Quilts, Custom Manikin Postures, CNC Drilling: Tips from the Masters

Model Trees, AR Experiences, and Curved Surfaces: Tips from the Creo Masters

Did You Know? Customize the Model Tree for Maximum Usability

CAD & PLM Technical Day - Latest Addition to LiveWorx

Creo Tips and Techniques Webcast Series (West)

Creo Tips & Techniques Webcast Series (East)