Community

I am using Windchill PDMLink Release 13.0 and Datecode with CPS 13.0.2.5how to create a drawing template for nx software

Hi, I want to understand what ways you have employed to distribute Creo Parametric config and setup files at an enterprise level to end users. We use SCCM to distribute / deploy base Creo Parametric application, but to distribute config and setup files, we use windows batch script that gets invoked once a day at end users' machines.  The setup files are kept at few regional servers (as repositories) and the batch script copies (robocopy, syncdirs) these files into the end user's device. We have not opted for packaging Config and setup files through SCCM as these files are changed or new files are introduced frequently.  And the need is to get them distributed as immediately as possible. Our requirements: Config and Setup files are maintained at one network location (mother repository).These files should be replicated to Regional specific repositories.The files then should be pushed from each Regional Repositories to end users located in respectiv

I am using Mathcad Prime Release 10.0 and Datecode10.0.0.0My company uses Python scripts to extract Mathcad Prime data to Excel spreadsheets. The Python code uses the MathcadPy library to extract data to the spreadsheets, but I am continually getting errors when running the code. I have also seen the error popup when running Mathcad Prime normally.We create a folder structure of Mathcad Prime files, using relative links to point to the folder/file at the next level up. We have a number of Mathcad sheets in the same folder and they all point to Mathcad files at the directory above , to make a make-shift library of electrical parts/parameters for our application.I will randomly see the error pop-up when accessing these files. It is also random, and there is no predictability to the error popping up.Here are the errors that I faced"An unhandled exception occured. See .log file"Exception data:System.Exception: Lisp applying: CallNodeCallback {global} to Engine.NodeCallback, 1419, NODE_READ

Version: Windchill 12.1 Use Case: CAD documents checking in from Creo remove WTpart attributesDescription: Whenever I check in a CAD object, it removes the part attributes each iteration. These are custom enumerated attributes that do not come from Creo, but get removed. I've searched everywhere and cannot seem to find anything on how to keep the attributes between revisions.

Hi, I've recently generated some geometry in Creo Parametric 11.0.0.0 on Windows 11, but I can't export it to a different file type for use in a different program. I've tried STEP and Parasolid filetypes, but both export as empty files. What is happening?Here's a photo of the file sizes, something is clearly wrong. Any help is appreciated! I attached the file to this post. 

I am a university student, and want to use the 9.0 version of Creo for my class. I ran into an issue where the the licence is "not suitable". How would I fix this issue? Thanks in advance.

When I try and run Creo 9.0 on my laptop it's giving an error and saying it can't register with the quality control agent and is shutting down. Any thoughts on how to fix this?  

I am using Windchill PDMLink Release 13.0 and Datecode with CPS 13.0.1.0Hello,In a Windchill customization i have a piece of legacy code that i find doubtful:transaction.start();int rowCount = PersistentObjectManager.getPom().execute(deleteBatchSpec, new WTHashSet(), false);transaction.commit();The DeleteBatchSpec is an SQL query targeting the lines to delete.The problem is, in the code i'm wondering about, this is not a batch execution, it is used at normal runtime. So my question is: how does this piece of code behave in a clustered environment? Is the cluster cache updated somehow, or is this code doing something really wrong?Regards,

Hello,I am trying to figure out where to find the Project Groups section in the Codebeamer X UI. An older wiki page for Codebeamer X (https://support.ptc.com/help/codebeamer/r3.0/ko/index.html#page/codebeamer/cbx_user_guide/cbx_projects/cbx_11126.html#wwID0ETSGKB) says that user groups can be added. But the link for how to do that is a circular reference to its own parent page which doesn't contain the information.  Are project groups still a thing in Codebeamer X? If yes, where do I find them? If no, what has replaced this functionality?

I’m trying to create a pen table to automatically print in black and white through a distribute patch. I tried several materials but it doesn’t work, the copy comes out in black and white. Can anyone help me with this? How can I automatically print a PDF in black and white using distribute? Thanks in advance for everyone’s attention!!

I have followed an article to enable the S3 for windchill vaults but not able to configure from windchill UI in vault configuration utility.  Configuring Windchill File Vaults to Use Amazon S3

Hi Community, I am using the Grid Advanced widget to display data in a tree structure (with expand/collapse for sub-entries). In a normal mashup, it works fine: I can open and collapse the sub-rows easily. But when I place the Grid Advanced inside a contained mashup, the expand/collapse buttons do not appear. Setup: I pass an InfoTable into the contained mashup through Mashup Parameters. When I do not specify a DataShape on the contained mashup parameter, it works. But when I add the DataShape to the contained mashup parameter, the expand/collapse buttons are missing. It almost feels like a ThingWorx 9.3 bug (since the behavior changes depending on whether a DataShape is set on the parameter). 👉 Has anyone else experienced this issue? Is this a known limitation/bug, or is there a recommended workaround for using tree structures in Grid Advanced inside contained mashups? Thanks!

Version: Windchill 13.0 Use Case: I want to be able to add a watermark on a Dynamic Document, this doc has a PDF representation.Description: Watermark from the Actions menu of dynamic documents is greyed out and cannot be triggered using the API workflow code.

Hello All, I have attached P10 sheet and an Excel sheet I am reading from. Many thanks to Werner and Stuart for helping me get this far. On page 12 of the Mathcad sheet, you’ll see the results of the axial forces and moments imported from the attached Excel file. On page 13, I’ve listed a couple of questions I need help with:1 How do I extract from the [TC axial Comp] forces of the panel forces (e.g. TC1, TC2, TC3, TC4, .... ) and place them into a vector labeled TC.Panel.Axial.Compr?2. How can I extract the [TC axial Comp] forces at panel points (TPP#), such as TPP3, TPP5, TPP7, TPP9, … and place them into a vector labeled TC.PP.Axial.Compr? Regards,Sam 

https://globalsummit.ptcuser.org/hub/events/b3c8bce9-f018-4cb8-b5d4-aad227addabb/landing

https://globalsummit.ptcuser.org/hub/events/6ba30427-db71-47db-85a9-b98533d777a2/landing

https://globalsummit.ptcuser.org/hub/events/b4a5cdd7-1c89-4182-95e1-db739dabf935/landing

We have a problem in our database from windchill 12. Normally all 3D EPMDocuments shoud have a globalID(sysid) in the DB, but many of them get a "null" value now.There is an api to get the globalid --> wt.epm.EPMDocumentMaster.getGlobalID()this api works fineThere is also an api to set the globalid --> wt.epm.EPMDocumentMaster.setGlobalID()this api gives me an error.Exception:javax.servlet.ServletException: GlobalID cannot be modified for persistent master: Assembly - CAD1000474015.sdcc Is there a possible solution for this? Is there a workaround for this and make the master not persistent for a few seconds until it's changed? ps: the sysid is something from creo elements/direct modeling      

i have been a long time user of MathCad, strongly prefer the old, non prime versions.  Thinking of trying Prime once again, in case MathCAD 15 no longer can be made to work.  When to activate a newly downloaded, properly assigned locked licence, Prime does not seem to have an activated licence.  For example the watermark is there, the activate button is live, and not all functionality is available.  I'm not sure what to try next.  I've verified the MAC ID, downloaded new licence files a few times, tried on Windows 10 and windows 11 PC (of course properly assigning the MAC is in licence manager).  I also opened a ticket for support, that I have paid for for years and years and years, and have enjoyed no reply so far (about a week of waiting). Any tips?

I am using Windchill ProjectLink Release 12.1 and Datecode with CPS 12.1.0.2have prouectlink but need wt partsHere are the errors that I facednone

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.0.2We are unable to register the Windchill Server in Windchill Workgroup Manager and are receiving the error message "Windchill authentication failed". We have already reviewed and tried the solutions provided in the available PTC support articles, but the issue still persists.Here are the errors that I facedWindchill Authentication failed

Version: Windchill 12.1 Use Case: there is no entry in available column list for soft type attribute when trying to customize "affected objects" table viewDescription: Create soft type attribute of type "Affected Activity Data".In Affected Object Table of New Activity there is a OOTB disposition named "Finished", "Work-In-Progress", "Inventory". (These are attributes of type  "Affected Activity Data" only).Instead of OOTB ones I want my soft type to show there. But while customizing table view I cant see the entry of these soft types in available column. How do I add these attributes to the table..?  

Version: Windchill 11.2 Use Case: One of our customer has updated the windchill & Creo 11, He is looking for a suggestion to manage the AFX & PipingDescription: How do we manage the AFX & Piping modules in Windchill?1 How can we use the AFX module in conjunction with our Windchill number policy? Currently, we have to use a generic project name to start the module.2 The same issue applies to the Piping module, which allows users to input any generic name to begin modeling. How can we control the piping number?3 What is the correct way to save a Manikin in the Windchill library and retrieve it when a user accesses the Manikin module? Thanks

Hello All, I have been manually inputting values from an Excel file into a table in Mathcad P10 sheet. I have attached both files. Is it possible to automate this process? I am interested in getting the values I highlighted in yellow in the excel sheet. Regards,Sam 

I am using Windchill PDMLink Release 13.0 and Datecode with CPS 13.0.2.6After upgraded windchill to 13.0.2.6, after that we are unable to Add "Title " in advanced Search Results Customize View List: Simple Search, most of the Column is missing, please provide info that how to add those Column.Here are the errors that I facednot found any "Title "in Available Column "Customize View List: Simple Search"