Community

Hello All, I have been manually inputting values from an Excel file into a table in Mathcad P10 sheet. I have attached both files. Is it possible to automate this process? I am interested in getting the values I highlighted in yellow in the excel sheet. Regards,Sam 

I am using Windchill PDMLink Release 13.0 and Datecode with CPS 13.0.2.6After upgraded windchill to 13.0.2.6, after that we are unable to Add "Title " in advanced Search Results Customize View List: Simple Search, most of the Column is missing, please provide info that how to add those Column.Here are the errors that I facednot found any "Title "in Available Column "Customize View List: Simple Search"

(Codebeamer 2.2.0.0)I cannot find a way to generate report with data from review-hub. I would like to monitor:number of ongoing review and their statusratio approved/rejected...how to call review data in the "new report" page ? Thanks !

New to this Mathcad Prime here. Version 10.0.  I converted a sheet from Mathcad 15, In the converted sheet, every time I change the inputs I get question marks on the outputs and have to go back and manually type the uints over again. Is this a bug or can I solve this somehow. Thanks.

Hi All,Would someone be able to tell me how to delete a row or column from any table in drawing mode? I've been looking for about an hour and still can't find a way. Appreciate any help anyone can give. FYI, I am currently using Creo 2.0.

Agenda:IntroOpen Discussion Nadeem Malik is inviting you to a scheduled Zoom meeting.Join Zoom Meetinghttps://eacpds.zoom.us/j/91201170204?pwd=oYdIqtvAvba8uaIahUBnfmaPiPHUK0.1 Meeting ID: 912 0117 0204Passcode: 814781

Could anyone suggest how I can setup a function within Mathcad to resolve the attached expression where I am looking to find theta? 

I am using Windchill MPMLink Release 12.1 and Datecode with CPS 12.1.1.2Want integrate Outlook Email thread automation

Are you frustrated with limited functionality when you use PTC Mathcad Express? Watch this on-demand 60-minute in-depth session made just for Mathcad Express users on how to get the maximum benefit from the PTC Mathcad experience.   Also, we have a new Mathcad worksheet available for download that gives an in-depth comparison between Express's capabilities and Mathcad Prime's capabilities. It was ghost-written by popular Mathcad author Brent Maxfield, so Mathcad Express users will learn a lot about what they're missing by not upgrading to Prime.

I have upgrated from Kepware 5.20.396.0 to Kepware 6.17.269.0.The project it is the same, it has channels in  OPC UA Client and 3 channels in  OPC DA Client.The 3 OPC DA channels communicate with the same OPC "Server Werum OCIF 1.5.0":- Channel 1 contains one device configured "Update Mode:Exception"- Channel 2 contains one device configured "Update Mode:Exception"- Channel 3 contains one device configured "Update Mode:Polling"In the old system Kepware 5 all worked smootly, in the new system with Kepware 6.17.269.0 the devices in "Update Mode:Exception" randomly have errors:- Read failed in opc client because half/all tags are in bad state- From Kepware logs "Reconnecting server on channel '...' due to GetStatus failure"- Write failed in opc client: from Kepware logs "Async Write 2.0 failed for '...'. Function error: 0x80010108 'The object invoked has disconnected from its clients.'"The device with "Update Mode:Polling" doesn't have problems.If I chan

I'm looking for guidance regarding how to set up a heat exchanger component in Creo Flow Analysis (CFA).  Are there any examples, tutorials, or online help available?  I'm not finding anything. Thanks! Mark  

I am trying to install creo 10 for college projects and i keep getting an error message when i input the license code. I know its right cause I've input it several times. Its through my university

Reference from topicI've been fighting with this issue for years now, in my case it was win32_gdi -- once I replace it with opengl it worked like a charm!!May I ask how does one start this Information Window, and where is this file support.inf.1 located?Thank you again Remy, you made my day!!!

Hello there,i am using creo 9.0 and vs professional 2022I want to create a full asynchronous creo toolkit application on VS professional, but i dnt know how to start in a proper way. using some online materials i have managed to create  something ,1) any guide or start point to async creo application2) How to pass RPC commands and where to find it ?3) when i try to unlock using protk_unlock , i get toolkit for drawing license isnt available , but i dnt use any api regarding drawings ?4) how to generate a pfc file and use that to get all the data of the cad part from the session?sorry if all these are basic as i am new to it . i have learnt creo toolkit synchronous mode but not this

Hi Guys, I’m looking for the Windchill Business Administration Guide for versions 11, 12, or 13. If anyone has a copy, could you kindly share it. Regards, Aj

Creo 10/11 compatibility with windchill 13, why 10 or 11 which is more better with pros and cons ?

Version: Windchill 12.1 Use Case: Adding parts to workspace takes a long timeDescription: We have some large family tables (~1000 parts). There really isnt a good way to break these apart. It doesn't seem to matter if you select 1 part from the family table for 10, it always takes about a minute to add. It looks like Java is at nearly 100% CPU usage on the performance monitor (I believe this is single core utilization). Does anyone have recommendations on what might be hanging this up or how to investigate further?

Hi,  you may find this question stupid..  i find out that in creo assembly, lets say i have 10 components ..  when i wanted to edit the mate (say distance mate) of the 5th component,  then the components 6, 7, 8, 9 and 10 hides...    the problem here is when i edit the distance, i am not sure whether is it going to hit/interfere with any of components that was added after 5th ..  after coming out of edit definition .. i find that it is interfering , then i have to change again ..  the case is not just with editing mates, but changing mates / position and so on ..    is there a way to avoid hiding of rest of components...  or is it too much to ask from creo...      thanks in advance .. 

Over 2 decades ago, I had a need to document technical analyses.  After some research, I discovered Mathcad V3 (?).  It worked with Windows 3 (or 3.1).  I was ecstatic that Mathcad served my specific needs!  Over the years, there were somewhat regular updates.  As had been mentioned in other posts, Mathcad originally used the Maple Symbolic engine and then moved away from it.  That was not a problem as I purchased a Maple license to fill in the gap.The above arrangement worked for me until PTC no longer supported Mathcad 15.  It served my purposes for many years, so I decided to try Mathcad PRIME.  It was an early version and it would not serve my purposes.  However, I kept track of it and it became obvious that PTC was serious about developing PRIME's capabilities.  I have had the opportunity to work with PTC PRIME 10 (and soon, V11) at my workplace.  I am pleased with the capabilities and considered purchasing a personal license.

Hi everyone,I'm currently working with the GridAdvanced widget in a ThingWorx Mashup and I’ve encountered a behavior that I’d like to improve.The grid is populated correctly, and I’ve set the DefaultSelectedRow property to 1, so when the mashup loads, the first entry is automatically selected — which works as expected.However, here's the issue:When I select a different row, make some changes, and then refresh the grid (e.g., by re-binding the data), the grid resets to the default selection (row 1) instead of staying on the row I had selected and updated.This causes a disruption in the workflow, especially when users want to immediately view the changes they made to a specific entry without having to re-select it again manually.My Question:Is there a recommended way or workaround to preserve the selected row in the GridAdvanced widget after a refresh, so that the grid does not jump back to the default selection?Any advice, workaround, or guidance would be greatly appreciated!Thanks in a

I have Mathcad 14, working fine till now. I was bound to reinstall the PC, but now I get error in licensing the mathcad 14. "Unexpected Error. The remote server returned an error: (403) Forbidden."I did not get any time limit when I bought Mathcad 14, so I should be able to continue using it. It is only for occassional private (academic) use.

Pretty self-explanatory! Though I don't think it's the case, I wanted to ask around if anyone can confirm that project baselines are not able to templates.  Thanks!

Version: Windchill 12.1 Use Case: We are looking to implement lifecycle state synchronization between Change Notice and Change Activity in Windchill. Specifically, we want the lifecycle state of a Change Activity to automatically update based on the state of its associated Change Notice—and vice versa. While reviewing the workflow configuration, we noticed the object event "Change Notice State Change". We would appreciate guidance on how this event functions and how it can be leveraged to achieve bidirectional state control between Change Notice and Change Activity. Could you please advise on: How this event can be configured within workflows? Whether lifecycle transitions can be triggered automatically in both directions? Any best practices or limitations we should be aware of?Description: Anyone implemented change notice state change in workflow

Hi Team,Just trying to figure out if anyone has tired out configuring 3D pdf generation with CVA for Creo and Catia.Any references or leads will be great help.

Hello,  I am curious of how to take the data being read from a Allen Bradley PLC and display it directly onto a Industrial LCD panel.  In our case, we are wanting to display the temperature along with a line graph to track whether it is increasing or decreasing.   What is the recommended product to do this on?