Community

I am using Mathcad Prime Release 11.0 and Datecode11.0.1.0The attached file crashes every time I change 'k'.Here are the errors that I facedNo warning. It just shuts itself down.

In our internal company documentation, I was able to find 24 ideas that are no longer accessible under the previous URL.I’d have expected the migration team to set up a URL redirection so that users automatically land on the new page!Idea: Ability to copy component name from the assembly model tree Old URL: https://community.ptc.com/t5/Creo-Parametric-Ideas/Ability-to-copy-component-name-from-the-assembly-model-tree/idc-p/1043189 New URL: https://community.ptc.com/creo-parametric-ideas-180/ability-to-copy-component-name-from-the-assembly-model-tree-170254 Idea: Improve the Symbol Definition Interface Old URL: https://community.ptc.com/t5/Creo-Parametric-Ideas/Improve-the-Symbol-Definition-Interface/idc-p/1053730 New URL: https://community.ptc.com/creo-parametric-ideas-180/improve-the-symbol-definition-interface-169904 Idea: Start with CreoView Lite and if needed toggle to get MCAD without exiting the tool Old URL: https://community.ptc.com/t5/Creo-View-Illustrate-Schematics/Start-w

How can the default on drilled holes be changed to 140°?  While 118° may be standard for a lot of drills, almost all of our drills Ø3/8 and up to Ø1-1/4" are 140° inserted tips.  As a Creo NC user, I change models all the time sent to me by Engineering that have holes put in at 118°, just to match the drill that I will actually be using.

Hello, i have problem with installation of mathcad. I couldn't go next from ,,Aplication Selection'' window so i haven't installed mathcad yet.Thanks for help.

Would anyone know if you can reference the Component Feature Number (not internal feature ID) in a relation for a filter in an assembly drawing repeat region?Wanting to use features in an assembly model tree, 2 features at a time using their location in an assembly model tree to control what components are displayed in an assembly drawing BOM table on a particular sheet.Basically, if the components are between any 2 features in the model tree that I specify, I want to show them and only the quantities for the parts in the BOM table repeat region on a drawing sheet for the components that reside between the 2 features in the model tree.Features would be named Sheet_2, Sheet_3, Sheet_4, Sheet_5, etc. and could be an annotation feature, datum plane, or other feature.Repeat region filter would be if greater than feature number for Sheet_2 and less than feature number for Sheet_3 display component info and qty of part in that section of model tree in BOM table.Each drawing sheet will build

Hello All,Advance Search done with some criteria, Results fetched fine, but when it exports to excel file, the values are blank, it is intermittent for big search (more than 10k entries).Could you please check and confirm whether cascading attributes are being used?-- No Those are Global Attribute. Please check the screenshot below from the affected server where attributes show blank in excel.The attribute value as displayed in the I have attached the both the exported search result from Prod and Test enviroment.Could you please confirm whether the working and non-working servers are on the same release or on different releases?--Production and test environment with same Release 12.1.2.14.Please find the search file for issue.Thanks,Achal

Ive been struggling to creat and report on the same run of modelcheck batchcreo 8.0.9.0 windows 11Ive already tried to input a list with xxx.prt.1 and long after xxx.prt.2 but it didnt work as well.

Can someone let me know the steps to create curves/splines from CSV Ai file?SEE Attach.It's AMAZING how fast Ai is catching up with human mind. PTC need deeper thinking… hahahaNEED TO BE ONE STEP UP!Creative Creo!

Update:  The PTC Community is open for engagement.  We are temporarily operating on a pre-moderation mode: the Community team is reviewing your posts before publication while we are finalizing the platform for regular usage.  The idea portal will be restricted to voting and comments at this time.The Community New Idea submission functionality will be launching soon on April 27th.Read more here We wanted to share some big news! Around April 6, we will be moving from our current Khoros Community Platform to the Gainsight Communities platform. Here’s what you need to know:  We’re excited about the careful integration of AI‑powered features that Gainsight offers to help community members—when they choose to use them—create meaningful, high‑quality posts. The Community Team will gain new in‑platform tools that allow us to deliver a more personalized experience for all community members.   We understand how important your community history and conversations are. Our technical migration exp

I am using Creo Parametric Release 10.0 and Datecode10.0.9.0How to create drawing template in HMX. Is there any option to apply sort and filter in data tables generated by HMX. After generating flattened harness drawing how to change orientation of connector.

Back in 2012 I purchased a WF5.0 Student license. Since it is tied to the network adapter of the computer, I assigned it to a USB NIC so I could move to a new computer without requesting a new license file.While that did work for a long time, I recently started having problems with that network adapter disconnecting. (I used to remove it when I wasn’t using it to “protect it” and probably damaged a wire.)As I recall, when I moved the license from the original computer to the USB NIC, there was an email address I need to send my information to.Is that still the method to make this change, or is there another way to accomplish this task?If this is the method, can someone provide me the correct email address? 

I was unable to create new local attributes even after running the AddColumns wt.part.WTPart String=1 query in the Windchill shell. Although the attribute columns were successfully added to the wt.part.WTPart table and the corresponding columns are visible in the database, the new local attributes are not being created still getting same old error “ A string attributes cannot be created because database columns of the following datatype are not available

I finally got permission and funding from Da Boss to go this year.  Who else is going?  If you are, want to schedule a meetup during one of the days?

Hello all,I use Schedule chart and I want to find a way how to expand/collapse several or all groups at the same time.Now, by default, it is possible to expand only one group (if I click on another group, the first one collapses).For example, if I click on LABEL-1 group, the detail opens, but if I click on LABEL-2 group, the detail opens for LABEL-2 group (while the detail for LABEL-1 group collapses). Please, find screenshots Is it possible to expand/collapse all or several groups at the same time?  

I just had Creo 10.0.7.0 crash. Thankfully I was no longer in any models at the time of the crash. Just starting to open a file. When I restarted Creo, all the “Recent” files are not from today - I had just seen them and chose one when the crash occurred. Any thoughts?

In Creo assembly design, is it a good practice to first validate the concept using Layout, then define a Skeleton model, and finally create parts within the assembly using skeleton references?Does this approach help avoid assembly issues, or are there better recommended workflows?

Hi,How can we establish an SSO connection between Thingworx and Codebeamer? Thank you!

Hello,How to establish sso connection between Thingworx and Codebeamer using the integration connector?Do we have documentation or articles to achieve this?Any leads will be appreciated, thank you. 

Hello,I have tried to upload the mathcad file, but it does not allow me. The following was working in mathcad 15, but it does not evaluate in prime Thanks,Sam

I Create Perforatted sheet Design,Draw 4mm sq Shape and Corner in 1mm Radius,Using Direction Pattern X and Y, Regeneration process get Long Time Almost 6Hrs,How to Speed Up This Process?