Community

Hello everyone, I’m using Creo 8.0.9 and I need to create a sticker adapted to the surface, but for that I’m using a decal.When the sticker is flat, applying the decal is easy, but when it’s curved, it becomes very difficult.Is there a better method?Or is there any parameter in the planar mode that can be set to automatically adapt to all surfaces?the surface its a extrude on a spinal bend

Version: Windchill 13.0 Use Case: We have a customized Workflow that has a Date as variable (actually, I would prefer a date like LocalDate for the user, but Windchill is still proposing the java.date.Date). I would like that a user can set the date during a User Task.Description: The variable is shown a a text, without any format hint for the user, and the conversion to Timestamp depends on the timezone of the user (if the String is not completely filled) ...How could we provide a date picker as input instead of a input text ? 

Hello All,I had created a thing (assigned value stream) programmatically and deleted programmatically (first value stream then thing).Now, Thing is not visible in composer, there is no ghost entity, no reference in any data table. Still some time it appears in application log as error that thing not found.  Any suggestion to move further.

Need installation file for Mathcad Prime 10. I have version 11 but I need to share files with a client that is using version 10.

I have a drawing where I've added additional rows to the revision block (1 per revision) and filled out the information. I save the drawing and check it in but the text doesn't show up. If I add this drawing to a new workspace, the text I added isn't visible but if I click on each cell in the table row the text is in fact there. All I have to do is click it and select OK for it to become visible again but then on check in it becomes invisible. As a result, the published drawing doesn't show this information.  This is the only drawing like this... I verified that all the properties are the same as the row that is visible (row for rev A).    Making the text show up on my drawing and checking it doesn't seem to persist.   

Hi, I'm looking for compatible versions of Visual Studio to customise Creo Parametric 12.4.2.0. Is it okay to use Microsoft Visual Studio 2026 (available as latest version) or safer to go for previous versions? Thanks.

My company using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.2.14We are planning to implement SSO enabled login by replacing prompt of asking login credentials. If anyone has suggestion or helpful documentation, kindly share here.Thanks in advance!

Version: Windchill 13.0 Use Case: The OOTB Windchill functionality appears to only allow one part instance allocation to each part included in the structure of a parent part Instance. For example, it appears that if I wished to associate 100 different instances of a child part within the structure of a parent part instance, I would first have to specify that the quantity of the child part is 100 before then allocating a unique part instance to each of the 100 rows. This could end up being quite time consuming.Description: I am unable to find a way of achieving the same objective in a more efficient manner. For example, it would be nice if it was possible to only include one row under the parent part instance which communicates the details of the child part. Using my example above, I could use this single row to specify a quantity of 100 before then using the "Allocate Existing Part Instance" wizard to multi-select the 100 child part instances I would like to associate with the row

I'm looking for some insight into how companies are handling temporary engineering deviations on released parts/drawings in PDMLink. Does PDMLink have any native capability for handling these situations, or is it up to each company to figure out how to handle this by using a lifecycle state or some other means?Here's an example of an engineering deviation -- a screw is out of stock, so a substitute screw is allowed for production but it has a different part number than what is shown on the drawing. In this case, the drawing needs to be temporarily modified but there's no change request involved. Once the screw is back in stock, the drawing needs to be reverted back to the original.Any insight you are willing to share is much appreciated!Brian GearyJava ArchitectInformation Technologyhermanmiller.com616 654 8993 OFFICE616 796 5257 MOBILEHermanMiller

Creo 10.0.6 I'm trying to set Detail Option config default_ansi_ord_dim_aligned to no in a drawing but the OK and Apply are greyed out. Tried both in part and drawing with same OK/Apply greyed out result. Drawing and part are checked out. Config ord_dim_standard is set to std_ansi. I can change other config options and OK/Apply are available. Seems like something simple I'm overlooking.

The Plant site is looking to display the RTPPM KPI dashboard on a 42-inch screen in a production environment. However, the current layout leaves a lot of unused white space, which makes it less effective for large-screen visibility.Is there a way to:Adjust the layout or resolution to better utilize the screen space?Enable a full-screen or wallboard mode?Customize the dashboard view to show more data or machine statuses in a compact format?Any suggestions, configuration tips, or examples from similar setups would be greatly appreciated.Thanks in advance! 

As per our Infrastructure team’s requirement, the QML report should include details such as license name and last login, similar to the information shown in the below screenshot, so can you pls help me with this.  

Hello everyone,   I have a setup where I’m working with a main project (Project A) that contains all the Things with configurations for two sub-modules: Project A – SubModule 1 Project A – SubModule 2 Each sub-module is component of Project A, and all configurations are stored in Project A’s Things.We have already published Project A as an extension on the production server, so both sub-modules are currently working independently (i.e., there’s no direct dependency or linkage between SubModule 1 and SubModule 2). Now, we have a new requirement where we need to access data from SubModule 1 inside SubModule 2.However, due to the independent structure and the way Project A is packaged, I cannot simply make one module depend on the other. 💡 My current idea: I’m considering creating a ThingTemplate inside the main Project A, and then creating corresponding Things for both SubModules 1 and 2 based on that template.I could then write shared services inside this template and use t

"The code execution cannot proceed because mfc140u.dll was not found. Reinstalling the program may fix this problem."Please show me how to install the above file "mfc140u.dll"

Hi all 🙂 in C9, compared to c4 that I'm used to, dimension witness line has selection priority over everything else.I.E:  auto - added angular dimension is exactly where the sketched line ends, and when trying to select line endpoint, I have to be aware of not selecting the dimension, if i need to drag the geometry. Else, when I try to drag geometry, but with this blue dot selected it drags the dimension and locks it as user modified.This is more than disturbing, as the dimensions at random have this "blue dot" drag point exactly where geometry ends, and i did not found a use case for selecting such witness line instead of dragging the dimension text/ value itself.question is, does config option to erase these dots exist? or to change this priority back to geometry ? so I don't have to mess with selection of the witness lines instead geometry?Thanks, cheers 🙂 

Mathcad Enhancement Proposal (MEP) - Extend the scope of ℤ to include all IEEE 754 consecutive integers, where ℤ is the set of integers.   Mathcad's Is-Element-Of operator x ∈ y determines whether x is an element of y, where y is one of the sets ℂ (complex numbers), ℝ (real numbers), ℚ (rational numbers), or ℤ (integers).  Is-Element-Of works both symbolically and numerically (except ℚ in the latter's case).     When numerically evaluating x for membership in ℤ, x must lie between -231 and +231-1.  However, Mathcad handles numbers as 64-bit IEEE 754 floating-point numbers; thus, the full range of consecutive numerical integers in Mathcad is -253 and +253-1.   The maximum positive floating point real number, realmax,  is 1.7976931348623157×10308.     realmax ∈ ℝ and realmax + realmax×1i ∈ ℂ both return true (1).   Implementing this MEP wou

Hello everybody!My company has just acquired Creo Parametric and it needs to develop add-on extensions to it. From the other hand, we have tons of useful C# code that we we want to reutilize.I just started to design the extension and my plan was to implement a 3-tier architecture consisting from the following layers:- DLL client build with Creo Object Toolkit C++, which may be registered as extension to Parametric.exe- Middleware build with C++/CLI which will allow client/server interop- C# libraries consumedUnfortunately, my trials so far to make server DLL extension dependent on the middleware class brought to the Parametric crashes.I'm absolute newbie to the Parametric programming so I would like to start this first post with some general questions.Do anyone has the experience with the using C# code from Parametric?Is the direction I tried makes sense with Parametric?If yes, what may be the causes for crash? (I will share code files as necessary)If not, what are the advised directio

Mathcad was a pretty good tool. A quick and practical way to do your engineering calculations. That was version 9 way back and still my most used version. After that things didn't change much and together with some minor improvements, some issues came into being as well. I suppose their was no profit in leaving a program that worked just be what it was and so Prime came into being. And what a piece of junk it was. Slow, cumbersome and either lacking important functionality or simply not doing what it should.   Now on version 5 things should have been better. I mean, after eight years enough people should have complained that it didn't work. Right? Yeah. Too much to hope for. It's still slow, UI is still a mess, you can't comfortably input your work quickly and key features that worked fine as far back as Mathcad 9 still fail miserably.   As is the case with many programs, if any of the developer would actually have to use their own program for actual work, they would have kno

lisansımı kabul etmiyor geçersiz dosya biçimi diyor

Hi, I'm having trouble finding the value of a variable using symbolic operations. Let me explain:I want to find the variable (theta) of a symbolic function within a range of valuesI'm using Mathcad 11

I'm using MathCAD 9.0.0.0. I get this error on my last equation... 

I'm using MathCAD 9.0.0.0. For whatever reason, MathCAD is having a problem with variable units of my final equation in my attached file. 

Hi, This does not help. The download link takes me to the email request form. There is no option to choose the version. I need to install version 10. I have version 11 but I need to share files with  a client that is using version 10.

How can I find the length of the profile when I select?I use this infos the boom list. I would like to add profile lenght.

I'm trying to access the model name and read it in a tree format from Creo ED. Tried a few Lisp APIs I saw in the document; didn't help much as none returned the model name. https://support.ptc.com/help/creo_elements_direct/r20.3.0.0/advanced_documentation/integration_kit/reference/function_index.html Is there any other way to access the data? C# also doesn't seem to have the related API on Part