Community

How to make the formula vertical alignment?I have some formulas like the picture below, how to make the formula vertical alignment in one vertical line?Now i use "Tab" key in keyboard, but it is not convenient.

In Creo sheet metal, K factor / Y factor are fixed during the material selection. During modeling, when I change the sheet metal thickness, this K factor / Y factor are not changed automatically. This leads to wrong development length calculation. As per the below mentioned PTC article itself it is mentioned as K factor should change according to the thickness. (K factor = δ/T). This fixed value is blocking me the automating the DL drawing preparation https://support.ptc.com/help/creo/creo_pma/r11.0/usascii/index.html#page/sheetmetal/sheetmetaldesign/About_Y_factor_and_K_factor.html

Upcoming PTC/USER RUG meetings. Save the date and watch for details - 9/30-Florida-St Petersburg, 10/1 Atlanta, 10/2 N Alabama-Huntsville,10/9-SoCal-Irvine

we are using windchill 12 and don't have access to creo view as the chromeOS doesn't support this app.i saw the chrome browser has webgl enabled but when i am clicking on the visualization, nothing is happening. please guide me here.

Teacher are back in school around here. Students soon to follow. The heat in the north has finally broke and we received some much needed rain after a long drought. I went almost 2 months without mowing my grass this summer. Looking forward to fall!! Be blessed and be a blessing to others.       DO ELECTRICAL ENGINEERS LISTEN TO AC/DC OR SOMETHING MORE CURRENT?

HiI make a very simple sheat (mechanical problem), i don't understand why blocksolve  fail ?I can to solve it with my hand and paper.  For example , i find with my hand:FA = -8978613,01FS = -1038187,81FO = -9333161,37Can someone help me ?

Our Mathcad Community forum has an Ideas section. They don't let me in there for political reasons. Thank God they're still allowed in here.The best idea for Mathad is to take all the good things from SMath.I will post pictures here describing some of the benefits of SMath over Mathad.I ask those who have access to the Ideas section to transfer my drawings there.

I would like to measure the distance between the centre of 2 holes, usually I would select the measure tool and select the surfaces within both holes to get a distance between the centres. I have tried to do this but the measure tool seems to only want to select certain surfaces and selecting the point rather than face. Can anyone help with this please? 

I am using Creo Parametric Release 3.0 and DatecodeF000Buongiorno,vorremmo spostare la licenza dal computer al server,grazieAndrea GrippinoNuove Officine Vivaldi

I wrote the following code in the expression but it does not run wt.fc.QueryResult qr= wt.maturity.MaturityHelper.service.getPromotionTargets(pn); while (qr.hasMoreElements()) { if(qr.type.equals("EPMDocument") { wt.lifecycle.LifeCycleManaged lifeCycleManaged = (wt.lifecycle.LifeCycleManaged) qr.nextElement(); wt.lifecycle.LifeCycleServerHelper.service.setState(lifeCycleManaged, wt.lifecycle.State.toState("DESIGNCHANGE")); } } I want to check the type of the object and change the lifecycle state only if it is an EPMDocumentCan you help me please?

The date time format on windchill details page and windchill navigate OOTB apps search result page is different not in sync. On windchill details page the date and time format is UTC (The date format was changed from default yyyy-mm-dd to dd-mm-yyyy) On Navigate app search details page date time format is different its coming IST and date format is still deafult.Windchill Version 13.0.2.4Windchill Navigate(Formerly Thingworx Navigate) Version -9.7.0 Can the date time format be in sync at both places? 

Version: Windchill 13.0 Use Case: Would like to add another design review category option called New Design to the default Design Review workflow in windchill that would be used for all new drawing releases.Description: How do I add a new category valve to Windchill Design Review workflow category dropdown menu shown in the images below?  

We have been using Arbortext 9.1.510/W Unicode version for many years. But, recently noticed that the text font is not applied for word spaces. It is showing "Minion Pro" for all the word spaces. It is applicable for all the fonts. We have tested the same font in InDesign application and there is no such differences. I have attached the PDF for review. Please look into this and let me know on how to resolve it. Note that, we are generating the ps from the .3d and then convert the ps to PDF using distiller joboptions.

Hi... I have user for Remote Devices, which do not have a password - so they are unable to login anyway. However, some of these - for troubleshooting - will receive a password, but should be extremely restricted in what they can do / see. This includes the User Profile Configuration with all the available menu points.   How can I empty all of these (except for "Modelling - Things") ? I tried to use the ConfigurationTable, but was not successful. When exporting to xml, I can see that the "Settings" Configuration Table does not have a dataShapeName. However, the service requires an InfoTable with a DataShape, so therefore the ConfigurationTable is not updated.   I do not want to do this manually as per https://support.ptc.com/help/thingworx/platform/r9.6/en/index.html#page/ThingWorx/Help/Composer/Security/Users/UserProfileConfiguration.html#wwID0EY64Y ... so how can I do this via a service?

Schönen guten Tag,wir haben eine Mathcad-Lizenz und nachdem ich nun einen neuen PC bekommen habe, funktioniert der Zugriff darauf jedoch nicht mehr.Wie könnte man das beheben?Nach Eingabe des Produktcodes sowie Eingabe der Kontoinformationen des PTC-Kontos (ich habe ein neues erstellt) kommt die Fehlermeldung "Der Remoteserver hat einen Fehler zurückgegeben: (403) Unzulässig."Viele Grüße

Can I execute RV&S 10.8 client program on Windows 11?

I have bound the data from DataTable. It throws an error which says "Mashup parameter not Expected ".

Creo AFX parameter and relation modificationsHello, I am working on trying to put in custom parameters and relations within the AFX parts. I figured out how to add parameters that are user defined by modifying the AFX  config start_mdl.cfg file, but the relations are not working. I need relation - driven parameters for multiple parameters when any beam profile for AFX is opened so I want them applied globally. I cannot find the afx_start_model that the start_mdl.cfg in AFX seems to reference for the current relations, and I have tried adding .rel files to reference relations within the start folder and also have tried editing the param_relations folder within the beam profiles without any luck.  I am not sure if it is a file location or syntax error, or if there is something I am missing. I essentially need to populate the AFX start parts for every beam profile with my own parameters and relations. Any advice or information would be greatly appreciated.&nb

Hi Team,Need some help from the community.Unable to see the Actions list when click on Actions for the WTDocument in Infopage.When select the WTDocument in folders page and click on Actions it does show all the list.Any idea wht could be the probable causes. Thanks in advance.  

Happy New Year, PTC Community!   After my guest talk Class A  Creo Surfacing on 11/21, the PTC Community Team asked me to come up with the first Creo Community Challenge for 2025!   Freestyle surfacing is impressive if you haven't used it yet consider this challenge.  1 Modeling: using Freestyle  2 Rendering: Creo Render Studio 3 Movement:  Creo Mechanism   The latter 'movement' might be fun for those robotics engineers looking to dress up their robot. On the heels (and continuation) of the gift giving season for many, I am asking you to think about and be inspired by your favorite gifts such as Kidrobot characters, Isaac Asimov I, Robot or from the Foundation Trilogy and Artemis space suits, space robot exoskeletons, pendent or jewelry, Star Wars or Star Trek spaceships, armor, baby elephant or underwater drones. As the first challenge of 2025, lets get as many community members involved as possible!  Deci

This month we have another 3D geometry challenge. We are projecting squares onto cylinders and spheres and measuring the perimeter. Create a worksheet that calculates any of the following:   Challenge 1: Perimeter Calculate the perimeter of a square with a side length of 50 onto the following: A sphere of diameter 100. A cylinder of diameter 100 and length 100. Clarifications: Note that the square is projected from a plane that is parallel to a plane tangent to the sphere or cylinder. It is projected in a normal direction from the tangent plane as in the accompanying images. For the sphere, the square is centered on the point of tangency for the plane to the sphere. For the cylinder, the square is centered on the middle of the cylinder and the tangent point. If the intention is unclear, please refer to the images or post a comment where the community can help explain the scenario to you.     Challenge 2: Area Calculate the area of the above projected squares. &nbsp

Hello Community, We have two projects in CodeBeamer. The requirements in the first project are identical in many ways to the requirements in the second project.We need a tool that will take a tracker from the first project and compare it to the same track in the second project, and do the following: Compare the description field of both requirements.If the same - copy the "Status" field and some Free text fields from the first project to the second project.If different - set the status field of the other project to "Under Review". Is this something that Codebeamer can support?  If not, is there an external tool we can work with to fulfill this need?  Any solution would be welcome 🙂 Thanks!

In the attached file - a collection of 100 fractals. Used IFS formulas. If you want to add a collection - you're welcome.Viktor

Hi Everyone. I have a service that takes job orders from ERP and saves RTPPM's job order and job order ap table. And works just fine.But my problem is sometimes job orders and products change via equipment things even job order sync and product sync configurations are disabled. (For information Use Job Order Model and Use Product Model is enabled.) Is there any service that changes this tables?

Could please tell us how we can open creo view for chromeos user and what are application need to install to open the