Community

Hello,I am a beginner in Mathcad using Prime 10.0.0.0 Educational Edition. I want to calculate the kinetic energy of a mechanical system so I have to define a time-dependant function, but I'm not able to do this. I want to calculate the symbolic expression. I write the function as alpha(t):=[function including t as time variable] and I don't get any errors, when I try to use this function later I get the error "The variable is undefined. Check that the label is set properly".I don't know if I'm using the time variable t wrong or it's an algebra problem.Any ideas? Thank you,Andrea

Hello,i have an aluminium cylinder De60 Di54 L148 [mm]with the attached condition (Condition 1 e 2 . jpg)As a result of the thermal analysis (Thermal_analysis.jpg) i have what show in "Result.jpg" about thermal analysis I'm not sure that is correctCan you give me your opinion about it? Thank you

I am using Mathcad Prime Release 10.0 and Datecode10.0.0.0Fatal Crash when copy/pasting text and math from one sheet to another. Window closed. pop-up opened and disappeared before readable. Lost whole days work over several tabs open.Disappointing that there is no autosave or periodic save setting, and no recovery mode to recover some of lost work.Here are the errors that I facedpop-up box flashed up briefly then disappeared before readable.

I need to move a large number of CAD Documents from one product to another. (Windchill Intralink 9.1)What I have to start with is a list of 1,200 part numbers.For each part number, there will be multiple drawings and models that begin with the same part number prefix.For example, for part 12345, I need to move 12345*.* from product A to product B, and in the same respective folder.Both products were created from the same template.They have identical QIR's, roles, policies, life cycles, & folder structure.Is there some way to script this massive move?Extra challenges:Some of the CAD documents might be checked out, or in a pending promotion.Some part numbers might not exist at all (no models or drawings).This would most likely happen if someone mistyped a part number in the list that was given to me.Gerry ChampouxWilliams InternationalWalled Lake, MI

Hello, I would like to see if is possible to create multiple individual drawings from one main assembly. Currently our templates are set up so the revision level and initials displayed in the drawing are attached to the model and windchill. This works fine for the initial drawing that will get approved by the customer but because we treat each drawing as its own separate entity/part number and can be used to make multiple different end items, it becomes a massive headache. Currently we are having to create a family table with a separate instance per each drawing, which is a massive pain for file management and if we have to make any changes to a model once created. Also, since we custom machine and fabricate all of our products, we build our end item/complete assembly first then create the different supporting drawings by hiding components using component display. Any insight on how to make this possible would be greatly appreciated.

Hello,   I am using creo elements/direct modeling version 20.6. I have noticed that it's still not possible to open a drawing straight from the model tree. Would it be possible to write a script or custom command to do this? Because now you have to go to the masterdata first and find the drawing there.    Other solutions for this problem are also welcome.   Kind regards. Siebe

We want to get details of every GTOL (Feature control frames) created in on the every sheet (sheet wise). session.GetModelWindow(model).Activate() sheet = model Dim drawing = CType(model, IpfcDrawing) Dim nsheets = drawing.NumberOfSheets Dim sheetData = drawing.GetSheetData(1) Dim test = drawing.ListItems(EpfcModelItemType.EpfcITEM_ANNOTATION_ELEM) Dim mItem = CType(sheet, IpfcModelItemOwner) Dim feats = mItem.ListItems(EpfcModelItemType.EpfcITEM_GTOL)But we cant get any GTOL in feats.We tried quering dimensions, we get those dimensions. but from mulitple sheets.How can i get GTOLs. how we can understand to which sheet they belong.

Hello,because Windchill is able to use Azure Blob Storage as File Vaults, I'd like to know if only HOT tier is supported or we could configure Blob Storage to move files to Cool/Cold/Archive tier, for cost reduction.I didn't find any info in the documentation regarding this point.Thanks,Alfredo

Hi, I've attached an example with two flexible assemblies. Each of these assemblies contains two parts whose x-position is controlled using a variable dimension. Now my task is to get the "actual" position as it can be seen in the main assembly. I obviously can't use wfcWComponentFeat::getPosition as this gets me the "as constructed" position. I tried to call wfcWComponentFeat::Refresh and wfcWComponentFeat::RefreshRelations before calling getPosition but this hasn't changed anything... Do i have to calculate the correct position myself or is there some kind of "trick" that i have to do in order to get the correct position? Thanks, Christoph

Hi so I'm working on this Thing that takes information from windchill, and puts it though a calculator to return times for the part. but is there anyway to use an O data connector or any feature to get a representation from windchill, there is the WRS partGetRepresentation but I do not know how to implement that into a service that can be called with a part Id or number, I currently am using getJSON to get the urls but that needs credentials in the code but is there a way to avoid having to log in each time by doing it another method that doesnt need to login.var url = "XXXXXXXXXXXXXXXXXX/Windchill/servlet/odata/v7/ProdMgmt/Parts('" + input + "')/Representations"; var result; try { var response = Resources["ContentLoaderFunctions"].GetJSON({ url: url, username: user, password: pass, timeout: 10 }); if (response.value && response.value.length > 0) { var rep = response.value[0]; // Check for valid 2D/3D thumbnail URLs if (rep.TwoDThumbnailURL && rep.Tw

Hello Forum Members,Is there any methode to setting OPC DA Client and DCOM setting in windows server 2022? I do setting dcom from kepserver manual book and only can browse OPC server tag. after import and look at quick client, all value in " BAD ".Anyone can help?

I opened a drawing to make a simple revision and immediately had trouble selecting items.  If I select a note the green box that normally surrounds the selection is offset and rotated.    Creating a new note results in the same.  I created a new sheet and switched the note to that new sheet and it is normal there.  switching it back to original sheet and it messed up again.  It only appears to be a problem on that sheet of that drawing.  It is affecting tables in a similar way.  Has anyone seen this and there is a way to fix it? 

Version: Windchill 11.1 Use Case: Set publishing priority based on naming conventionsDescription: Hi Everyone, I've a use case where I need to filter the files with naming conventions (Eg: mnpl) need to be published on high priority. Here I need customization which need to be added in Windchill properties and sample code to get this achieved. Thanks in advance,Keerthi

I am using Creo Parametric Release 10.0 and Datecode10.0.8.0on a bulk item PProMdlType::PRO_MDL_PARTProMdlsubtype::PROMDLSTYPE_BULKProParameterDelete returns PRO_TK_GENERAL_ERRORThis same code works fine on parts.The UI can delete these parameters. I am a bit lost as to why i cannot delete them. If i am suppose to be able to delete these, i will create a mini project and share the source.

Hi All,How to manage SolidEdge users in Windchill?Do any of you have experience managing SolidEdge files in Windchill? Thank you.Regards==deddy==

I am currently making a mashup in ThingWorx 9.6.1-b253, that needs to call upon a few private services from the thing PTC.Nav,ViewPartStructure. I have tried making a template of that thing and making my own thing inside the same project I am currently doing my work in, as the error states: " Access Modifier Check Failed; Thing: [SMDCostingCalculator] SMDViewPartStructure, accessing ThingTemplate: [ptc.nav.PTC.Nav.Default] PTC.Nav.ViewPartStructureAppThingTemplate Scope: NONE, with Service: GetRepresentableInfo Scope: PRIVATE. Reason: Private Characteristics are accessible only from project in which they're defined." which i can guess is because my thing, SMDViewPartStructure, is not in the service of PTC.Nav.Default.  Is there any workaround to be able to call these services as i need them. I know its possible as my company has another template that calls upon the service in a mashup in another project and seems to work, yet doesnt work when called as a service. &n

Hi community,I need to automate a KEPServerEX installation but also want to enable the Configuration API at the same time, so it cannot be forgotten. Is there a way to specify this in the KEPServerEX6.ini file during installation or is there a way to manipulate the [Config API Service] in the C:\ProgramData\Kepware\KEPServerEX\V6\settings.ini file? All comments an insights are much appreciated!   

I am using Windchill PDMLink Release 11.1 and Datecode with CPS M020 CPS30Is it possible to update task deadlines after receiving the tasks at user end to set as per SLA.

I want to create a WTDocument in Windchill which may also contain primary content from ThingWorx (by creating a form in Mashup). I'm new to Thingworx and want to know the steps to do so.

I tried opening Creo, but it doesn't start. Any help would be kindly appreciated. 

on the Logix platform, why would @MODE work as a tag  but @IsPresent will not pass Syntax check?  Both are valid. (v6.12)

There anyway simple to identify what part is suppressed in a mammoth .asm? Tricks / Tips Pl ....Thx in advance!

I want to rotate an existing group in a part and delete the original. I tried: - Paste special and then used the independent option: It's not independent.- Paste special and then used the advanced option: Cannot simply rotate.- Tried Pattern: Cannot delete/suppress original. Is there a simple way to do it? 

Hi,I have a piece of programming but I'm having trouble understanding all the steps and the programming to reach the product graph.  Can someone document what is happening in the attached?  I hope it will be a step to understanding more complex programs.

Can someone help me to redefine a variable in a for loop or get me moving in the right direction?  I am new to Mathcad.I am calculating a standard step gradually varied flow profile in a steep pipe.  Pages 1 and 2 are inputs and  creating functions that define the geometric properties of the open channel flow in terms of flow depth (y)In the solver block is the energy equation with upstream energy on the left and downstream energy + friction loss on the right.  I want solver block to find the downstream depth (yd) that makes those sides equal, which I get.  (note: the velocity V and friction slope Sf terms in the equation are functions of y, so I can't solve algebraically)My problem is I need to repeat that step by step along the pipe.  for simplicity now I have (100) 1 ft steps in a 100 foot long pipe but those values are arbitrary until I can get the for loop working.In the for loop, for every step I want to redefine yu equal to yd.  I want to be ab