Skip to main content
G
GaneshK1-Visitor
1-Visitor
June 13, 2018
Solved

Define Piece Part

  • June 13, 2018
  • 2 replies
  • 2861 views

In NX there is a option as 'Enforce Piece Part'. By this option it will not be possible to add any other part/component so that resulting part will be only piece part, not an assembly part.

 

Is there any similar option/preference available in Creo?

Best answer by BenLoosli

NX is a different architecture than Creo.

NX allows multi-body parts, Creo does not.

NX uses a single file extension (.prt), Creo uses multiple extensions (.prt, asm, .drw, etc.).

There is no need for this option in Creo.

 

18 years using UGII/NX, 18 years using Pro/E/Wildfire/Creo.

2 replies

S
23-Emerald III
StephenW23-Emerald III
23-Emerald III
June 13, 2018

No. Creo does not support multi-body parts so this concept is not valid.

 

G
GaneshK1-VisitorAuthor
1-Visitor
June 13, 2018

Hi @StephenW,

Thanks for the reply. I have attached a short NX video as a example.

S
23-Emerald III
StephenW23-Emerald III
23-Emerald III
June 13, 2018

I won't download a video due to security issues.

Creo does not allow multiple parts in a part.

    B
    23-Emerald III
    BenLoosli23-Emerald IIIAnswer
    23-Emerald III
    June 13, 2018

    NX is a different architecture than Creo.

    NX allows multi-body parts, Creo does not.

    NX uses a single file extension (.prt), Creo uses multiple extensions (.prt, asm, .drw, etc.).

    There is no need for this option in Creo.

     

    18 years using UGII/NX, 18 years using Pro/E/Wildfire/Creo.

      G
      GaneshK1-VisitorAuthor
      1-Visitor
      June 13, 2018

      Hi @BenLoosli,

      That clarify everything, Thank you! Smiley Happy

      Can't we mark more than one reply as solution?

      S
      23-Emerald III
      StephenW23-Emerald III
      23-Emerald III
      June 13, 2018

      No, you can only mark one as the solution. 

      I would mark Ben's as the solution since it is the most clear explanation.

      Terms & ConditionsCookie settingsAccessibility statement