Drafting

Creo Elements Direct Modeling 20.7.1.0 (English):I can't "snap to" or "catch" an intersection when dimensioning.In this case I would like to dimension from the bottom of a key slot to the top of the shaft at the 12 o'clock position. The only way i have found is to draw a very short vertical geometry line at the point where the center line intersects the diameter line. When I create this line I can snap/catch the intersection of the center line and the diameter line WHY can't I catch the same intersection when dimensioning?Thank you for your help.Tim Higdon

Hi, I need an expert advice on how to export a BOM generated in Creo Elements drawing sheet to excel or any other formats which can further connect to any other applications.Appreciate your response. ThanksNaresh

Hello, Right now a supplier is using Creo elements direct modeling latest version and they create annotations drawing files and send .bd2 files to us. I wanted to ask if there was a way for us to open it or convert it without having to turn it into a neutral file? We tried step file but my issue is when it comes to Creo Parametric the models are broken? Is there no direct way to address this? Thank you. 

The attached files are on an old PC that are working with version 20.7.When I copy these files to the new machine (in the same file location) that do not work on the new machine running 20.8. How do I get them to work? Thank you for your help

最近、と思いますがリビジョンチェックで図面をロードする際「’TopY’という名前のパーツが一つ以上あります」というアラートが出ます。「OK」をして進み、＜比較＞を実行すると「***ロードファイルで図面がロードされていません」と表示され比較されません。対策はありますか？ Windows11 25H2Me10はV19.0なのでサポートはされておりません 

Hi everyone,I’m working in Creo Parametric 12 and I want to make hidden lines in my drawings more visible(you can see in photo 1 how it's now). Specifically, I want:Dashed segments to be longerLines to appear clearer for printing and on-screen viewingI think i have to add a line to my drawing settings but i don't know which one. Could you please advise how to achieve this?Thank you!

HiFrom a few days I am unable to access PTC site when I ask to request an activation key, either for version 8.0 or version 9.0 (I installed just yerterday for trying to solve this problem !). I am falling always on this site error  :What can I do ?Yersterday electric outage stops my computer and I lost access to works in progress !Help me please.Best regards.Bernard Ancelle

Hi,we have this scenario: a notebook HP ZBOOK STUDIO 16 G10 (Microsoft Windows 11 Ent 24H2), a HP THUNDERBOLT DOCK 280W G4 and a monitor PHILIPS 273V5L. We use PTC CREO 20.6.1.  The problem is this: when we open Drawing on the Philips monitor, the program crashes and closes all open programs. I attach the error that the event viewer reports. If we open Drawing on the laptop monitor, the program starts correctly. If I update the Nvidia video card driver, then the problem is solved for a while... Should I reinstall Drawing from scratch? Or should I reinstall Windows entirely? Thank you.Best regards,        

How to change the the numerical of Tolerance in Creo elements directs Drafting (Mixed UI) 20.7I have a issue with creating the tolerance. For example. When I type the tolerance 0.027, it only show 0.03 I tried to find the Tolerance setting box and never see it. Please help me to  change this format. Thank you 

I use Creo elements/directs drafting Mixed UI 20.7 But in one day I drew a rectangle result in a parallelogram automatically. Who are know the tips to fix this case?

I use Creo elements/directs drafting Mixed UI 20.7 on Lenovo LOQ gaming 2024 having RTX 2025 Nvidia When I draw any Geometry (Line, Circle, Point, Rectangle,...), I can not see it on displayI had tried to solve by checking Geometry setting, Viewport -> setting, Setup -> show -> Layer. But all fault. I see that I open Setup -> show -> Layer, change color to White and save. But, when I open again. It is still default with Black. whether is that the cause? What is the way to get ? Or. Who are know the tips to fix it? Thanks

Hi, I am trying to create a new format with titleblock & other model details. When the parameters are added in the title block the same is not updated when model is called in the drawing sheet. Kindy help.ThanksNaresh

I was able to copy this activation key, which is valid for 72 hours, and paste it into the Manual Product Activation window to use it.The first time, I was able to use it for 72 hours without any problems. After 72 hours have passed, I want to use it again, so I do the same thing, but this time a window appears saying that is incorrect and I can't use it. No matter how many new activation keys I receive, each key is always incorrect and a window appears with the message "the key is not correct". Question:Is this 72 hour activation only once per account? ↓↓↓Confirmed↓↓↓"I create a new account, and i get another 72 hours for activation.But it seems so ridiculous to create a new account for every 72 hours activation..."

Looking for documentation for the me10.ini file.

What are the command line options for me10f.exe?

Hi everyone, I have a question. I have attached a DWG file below. When I open it in AutoCAD, I can see the view and annotations. However, when I open it in Creo, the annotations and drawing view are not showing. Does anyone have a solution for this? What settings and configurations are needed to open a DWG file in Creo?   The DWG file is a 2013 version of AutoCAD.   this is in AutoCad and this is in Creo    

Dear Sirs,I hope this message finds you well.I am currently encountering an issue while using CED 20.6. Specifically, when attempting to insert a section view while editing a drawing, I receive the following error message: "The selected view belongs to a read-only part or assembly," which prevents me from proceeding with further edits or operations on this view.I have attached a screenshot of the issue (please refer to the attachment) for your reference.I have attempted the following troubleshooting steps, but the problem persists:Verified whether the part is set to read-only mode.Restarted the software and reloaded the drawing.Tried loading different parts, but the issue remains the same.Could you please advise on how to resolve this issue? Is there a way to adjust the settings to remove the read-only status of the view?Thank you for your time and assistance. I look forward to your guidance on this matter.Best regards,Lan

After use tool Isometric in Modify tab, I create rectangle and have error like that. Please help me how to do to be normal.

Creo Elements Direct Express won't open. Get the One Time Activation dialogue box then the proxy server dialogue box, then the request license dialogue box. Get the 72 hour activation code and enter it and it says it is invalid.  Anyone else having this issue??   Thanks,       

Hi everyone,I wanted to find a course or video playlist or pdf document about Creo Elements/Direct Drafting (Mixed UI). I'm a newbie and want to self-study Creo Elements/Direct Drafting with Mixed UI interface.Please share me if you have relative document. Thanks advanced!

I use Creo Elements/Direct Drafting (Mixed UI). I want to turn on Part brower as the below picture to manage layout. Please guide me how to turn it. I appreciate your prompt response.

Hi guys, hope you all are doing well . Need guidance. Whenever I enter text in creo .sec file, the triangle border appears and I cannot remove it. And it shows even if I export that file into another format. Please guide me how to remove it. I am using creo 10.

Option CENTER_LINE is default when I dim circular in CED Drafting 20.7. Please guide me how to set up option NO_CENTER_LINE is default.    

Hello,  Is is possible to make a drawing in Creo 9 of an assembly made in Catia v5?  I'm making an component for a client. The component consists of two sheet metal plates that are cut and welded together and then applied a gasket. An assembly in Catia contains solids and surfaces that represent the plates and welding paths.  I modeled the components in Catia v5 r28 and the customer uses Creo 9.  The advantage of having it in creo would be that the client can open and edit the drawing directly. But I assume there is some loss in reliability and functionality when working across softwares like this. 

HiWhen I create a section view in the drawing the hatch will create for regions that are not necessary and these regions are part of cut exclusions in standards. What should I do to prevent cut exclusions in drawing when I create a 2D draft and section view and prevent hatches on these regions?