Skip to main content
P
Prakash_P5-Regular Member
5-Regular Member
January 24, 2025
Solved

creating cross section-Creo parametric 10

  • January 24, 2025
  • 3 replies
  • 1231 views

Need to create a section that combines a full section and a half section for a concentrically assembled assembly. Please refer "section.png" for detail info.

 

Thanks in Advance

Prakash

Best answer by KenFarley

The reason you can't do this is because it is not standard sectioning. Or at least not like anything I've ever seen. How would the section be referenced in a view orthogonal to the section view? You can't have a combination of an offset section and a planar section in this fashion. Why not just make an offset section with the 1/4 "pie slice" cut out?

3 replies

K
KenFarley21-Topaz IIAnswer
21-Topaz II
January 24, 2025

The reason you can't do this is because it is not standard sectioning. Or at least not like anything I've ever seen. How would the section be referenced in a view orthogonal to the section view? You can't have a combination of an offset section and a planar section in this fashion. Why not just make an offset section with the 1/4 "pie slice" cut out?

M
manjunathrv17-Peridot
17-Peridot
January 28, 2025

See the attachment. I was able to achieve this using 2 sections in a view.

    A
    anursinghCommunity Manager
    Community Moderator
    February 26, 2025

    Hi @Prakash_P,

     

    I wanted to see if you got the help you needed.

    If so, please mark the appropriate reply as the Accepted Solution. It will help other members who may have the same question.
    Please note that industry experts also review the replies and may eventually accept one of them as solution on your behalf.
    Of course, if you have more to share on your issue, please pursue the conversation. 

     

    Thanks,
    Anurag

    Terms & ConditionsCookie settingsAccessibility statement