Skip to main content
H
HARSHVARDHANPAN1-Visitor
1-Visitor
April 23, 2014
Question

how to integrate the material cost + operation cost to get total cost

  • April 23, 2014
  • 1 reply
  • 2388 views

As we know on manufacturing a part, we take blank (Workpiece) and it will passes with various operation like (machening, boaring, shaping, drilling etc.) each operation contain its own charges($) for removing specified amount of material in specific time. so Material Cost of Each part + Machening Cost of each part = total cost

 

i wants to perform above work in proe -

first - how do i find the machining cost for each operation. so whenever i change the dimension of the part, part will get modify and metal removal also increase/decrease + operation performed (machening) will increase/decrease, on the basis of this total cost is modified - is that thing is possible in proe if yes then how do i perform it

 

please give me your suggestation


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

1 reply

J
jsarkar1-Visitor
1-Visitor
April 24, 2014

Enter a paremter cost /kg. Enter the formula Material Cost= cost/kg* reported mass of the workpiece. So you get totl material cost. For welding you can also get the cost in that ways. Similarly when you get all the manufacring cost enter the relation total cost = material cost + process 1 cost +.. etc.

H
HARSHVARDHANPAN1-VisitorAuthor
1-Visitor
April 24, 2014

jayanta sir,

this answer is helpful for me but if i took one rectangular block, then i want to cut on15 (degree) a dovetail on the rectangular block by dovetail milling- so hear we apply milling operation so we consider milling machine cost

so it took machine cost + removed metal cost + part cost by cobining all that we get total cost.

please suggest how do i perform this, is this work should perform in creo or other module of manufacturing

H
HARSHVARDHANPAN1-VisitorAuthor
1-Visitor
April 30, 2014

Enter a paremter cost /kg. Enter the formula Material Cost= cost/kg* reported mass of the workpiece. So you get totl material cost. For welding you can also get the cost in that ways. Similarly when you get all the manufacring cost enter the relation total cost = material cost + process 1 cost +.. etc.

Sir as per this discussion we get the material cost and the process cost but sir how do i add this two cost (1. prt. cost + 2. welding cost) because we made a relation in different module and display it in the drawing template.

Terms & ConditionsCookie settingsAccessibility statement