Question
Pro/E Starts Slowly
Greetings...
On some machines, Pro/E seems to start very quickly. On ours, however, it seems agonizingly slow. For example, it may take as long as 45 - 60 seconds before it starts and is ready for the user. I am aware of all of the "usual suspects" and this problem appears on workstations that have local installations, local configuration files, no mapped drives (related to Pro/E), etc. This is also on decent hardware (for example, Intel Core 2 Extreme, Quad-Core 3.0 GHz, 12MB L2 Cache, 4GB RAM, 10K SATA Disk, etc.).
Pro/E WF2 M250
Windchill PDMLink V8 M010
Any suggestions on how to get Pro/Eto start faster orthings I may be missing?
Thanks in advance...
Mark R. Nelson
SeniorCAD Application Support Specialist
Remy International, Incorporated
2902 Enterprise Drive
Anderson, Indiana 46013
Office: +1 765.778.6711
Mobile: +1 765.621.6062
Fax: +1 765.221.7211
On some machines, Pro/E seems to start very quickly. On ours, however, it seems agonizingly slow. For example, it may take as long as 45 - 60 seconds before it starts and is ready for the user. I am aware of all of the "usual suspects" and this problem appears on workstations that have local installations, local configuration files, no mapped drives (related to Pro/E), etc. This is also on decent hardware (for example, Intel Core 2 Extreme, Quad-Core 3.0 GHz, 12MB L2 Cache, 4GB RAM, 10K SATA Disk, etc.).
Pro/E WF2 M250
Windchill PDMLink V8 M010
Any suggestions on how to get Pro/Eto start faster orthings I may be missing?
Thanks in advance...
Mark R. Nelson
SeniorCAD Application Support Specialist
Remy International, Incorporated
2902 Enterprise Drive
Anderson, Indiana 46013
Office: +1 765.778.6711
Mobile: +1 765.621.6062
Fax: +1 765.221.7211