cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - You can change your system assigned username to something more personal in your community settings. X

someone can repair heal the dimples that are corrupted?

aminhas
12-Amethyst

someone can repair heal the dimples that are corrupted?

Please see the attached stp file if you can.

36 REPLIES 36
Inoram
13-Aquamarine
(To:aminhas)

I was just going to delete them all out and put them back in. But I can not figure out a simple way to get the pattern to work. Can draw in 100+ points, but that's a lot of work.

dimples1.JPG

aminhas
12-Amethyst
(To:Inoram)

thank you but sorry I can't do that.

Inoram
13-Aquamarine
(To:aminhas)

One surface is easy.

dimples2.JPG

TomD.inPDX
17-Peridot
(To:Inoram)

IDD is -still- a big pain...

I got these solid but they are missing a lot of dimples.

There really is no rhyme or reason with how IDD is working.

But also, the import files really are not very good.

Creo 2.0 attached.

idd_solidify.PNG

This one too is pretty bad. It is now a matter of replacing the missing bumps.

idd_solidify2.PNG

aminhas
12-Amethyst
(To:TomD.inPDX)

will you please repair and solid this file? its better for me you make video

Inoram
13-Aquamarine
(To:aminhas)

Antonius got you mostly there, you should be able to take his models and just draw in the missing balls.

aminhas
12-Amethyst
(To:Inoram)

will you please repair and solid this file?

Adnan,

I not experienced user in Import area, so I did simple test.

  • I opened STEP file in Notepad and looked for accuracy info ... 1.959893631850E-5
  • I created new part in Creo Parametric 2.0 M070 (in millimeters) and set minimum possible absolute accuracy 0.000073
  • I imported STEP into this part
  • result is the part containing geometry checks and a lot of inverted dimples ... see attached pictures

Martin Hanak


Martin Hanák

thank you very much is that possible you will make a video?

Adnan,

what do you want to see in the video ? You are not able to reproduce my procedure ? What Creo/ProE version do you use ?

Martin Hanak


Martin Hanák

Sir,

I want to see very thing step by step i am using creo 2.0

Adnan,

I am not able to record video. I try to describe my steps.

How to enable absolute accuracy

Put the following option into config.pro file.

enable_absolute_accuracy YES

How to create new model

File > New > Part > uncheck Use default template > OK

select template model in millimeters > OK

How to set accuracy

File > Prepare > Model properties

click change on 3rd line (Accuracy)

in Accuracy dialog box set Absolute option and enter 0.000073 value > Regenerate model > Close

How to import STEP file

activate Model tab

click Get Data > Import > select STEP file > Open

in File dialog box click Details > uncheck Use templates option > OK

in File dialog box click OK

click green check mark button in Import tab

That is all ...

Martin Hanak


Martin Hanák

enable+absolute+accuracy.pngwhat next Sir?

Adnan,

I interrupted my previous response by mistake. Now it is complete and you can continue. So go two messages upward .

Martin Hanak


Martin Hanák

Untitled.pngwhich one Sir?

mmns_part_solid


Martin Hanák

please see is that right? now how to repair & solid?

Adnan,

I am not able to heal the geometry of your model. I suggest you to ask the creator of STEP file to send you geometry in other format, eg. IGES.

Martin Hanak


Martin Hanák
Patriot_1776
22-Sapphire II
(To:aminhas)

I only have an older version of creo. If you have a version of Solidworks, use that to export a STEP file. Sometimes when I get vendor STEP files, I import it into Solidworks, and that usually automatically fixes it. If not, I use their version of IDD, fix as much as possible, then STEP out to Pro/E. That usually fixes most everything.

Jose_Costa
6-Contributor
(To:aminhas)

If I understand your problem is replacing the damaged spheres.

It´s not difficult. Inside IDD select a good quality complete sphere (with just two surfaces), the copy it and paste special.

1.png

Now, the transform interface appears. Select "centered" and select one of the damaged surfaces and one of the copied ones.

2.png

This process will make a copy of a sphere and center it with the center of a damaged one. Repeat the process through all the damaged ones.

Now delete the damaged surfaces and merge the new surfaces with the base surfaces and solidify.

Done.

3.png

I can make a small tutorial if you want, but not in the following days.

Jose

aminhas
12-Amethyst
(To:Jose_Costa)

Dear Jose,

yes you are right. may I know when you able to make tutorial that will be very help full to me.

thanks,

Patriot_1776
22-Sapphire II
(To:Jose_Costa)

Excellent, thanks Jose! I find IDD to be a pain, actually. I want something automatic, like Solidworks does.

Jose_Costa
6-Contributor
(To:aminhas)

I have to do this in various steps.

This first video shows how to copy the spheres and how to merge them with base surfaces.

If you have to repeat a operation several times, use mapkeys to speed up the process like I do in the video.

Video Link : 5087

Let´s see if tomorrow I can do another one.

Jose

aminhas
12-Amethyst
(To:Jose_Costa)

Hello Jose,

any option to download this video?

Jose_Costa
6-Contributor
(To:aminhas)

I don´t think so.

aminhas
12-Amethyst
(To:Jose_Costa)

Jose,

am waiting your next video.

Jose_Costa
6-Contributor
(To:aminhas)

Hi, I hope you can understand the tutorial.

I attached the .prt file

Video Link : 5095

Jose

aminhas
12-Amethyst
(To:Jose_Costa)

Hello Jose,

thanks you very much but can't fine any futures which to make?

Announcements
Business Continuity with Creo: Learn more about it here.

Top Tags