Skip to main content
V
VS_120094401-Visitor
1-Visitor
September 26, 2024
Question

HTTPS configuration for REST SERVER

  • September 26, 2024
  • 2 replies
  • 792 views

hi, am trying to connect to my webserver using IIOT Gateway pulgins Configured as REST SERVER,
Since it was tested using HTTP during testing , it was working fine , While for Production we have to do it in HTTPS.I Am a not able configure it , Support needed.

Thingworx Kepware SERVER EX V6.16.217.0


As iam trying to upload SSL certificate, its showing format error.
''Failed to import the Certificate. the format is in valid''

2 replies

M
MKhatri15-Moonstone
15-Moonstone
September 26, 2024

Hello,

 

There are many things that could be incorrect with the certificate – some common ones are:

  1. Certificate is self-signed, but the “Certificate Signing” bit is not set as an allowed usage of the certificate
  2. Certificate is expired, or was issued on a machine with the incorrect time and is not yet valid
  3. Certificate and Private Key are not included in the same file (for instance certificates only)
  4. Private Key is password protected (only for instance certificates of some KEPServer components – some components do support password-protected keys)

 

Please go through the article attached for the resolution.

https://www.ptc.com/en/support/article/CS412176

 

Regards,

Mohit

 

Catalina
CatalinaCommunity Manager
Community Moderator
October 1, 2024

Hi @VS_12009440,


I wanted to see if you got the help you needed.


If so, please mark the appropriate reply as the Accepted Solution. It will help other members who may have the same question.
Please note that industry experts also review the replies and may eventually accept one of them as solution on your behalf.


Of course, if you have more to share on your issue, please pursue the conversation.

Thanks,

Catalina | PTC Community Moderator
Terms & ConditionsCookie settingsAccessibility statement