Skip to main content
A
Alex_R7304-Participant
4-Participant
April 21, 2025
Solved

Total List of Materials to long for Drawing

  • April 21, 2025
  • 2 replies
  • 975 views

Hello ptc community,

 

If I create a List of materials (BOM) of an large assembly, the list does overlap with the frame of the drawing.

Is it possible to split the list from one to two, to shorten the length?

 

I know that I could use a bigger format for example to change from an A3 sheet to A2.

But if everything fits to the format sheet (If the list is split to two) it would be worse to take a bigger sheet.

 

Version of creo is 4.0

 

Yours sincerely,

Alexander

Best answer by BenLoosli

There is an option in the repeat region menu to paginate the BOM into multiple columns. You can then move a portion of the BOM to a different sheet.

2 replies

B
23-Emerald III
BenLoosli23-Emerald IIIAnswer
23-Emerald III
April 21, 2025

There is an option in the repeat region menu to paginate the BOM into multiple columns. You can then move a portion of the BOM to a different sheet.

    A
    Alex_R7304-ParticipantAuthor
    4-Participant
    April 30, 2025

    You mean in the menu manager right?

    Which one is it.

    kdirth
    21-Topaz I
    kdirth21-Topaz I
    21-Topaz I
    April 30, 2025

    Creo 7:

    kdirth_0-1746023660876.png

     

    There is always more to learn.
    A
    anursinghCommunity Manager
    Community Moderator
    April 28, 2025

    Hi @Alex_R730,

     

    I wanted to see if you got the help you needed.

    If so, please mark the appropriate reply as the Accepted Solution. It will help other members who may have the same question.
    Of course, if you have more to share on your issue, please pursue the conversation. 

     

    Thanks,
    Anurag 

    Terms & ConditionsAccessibility statement