cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

The community will undergo maintenance on October 16th at 10:00 PM PDT and will be unavailable for up to one hour.

Integrity Solution Installation

ptc-4643115
1-Newbie

Integrity Solution Installation

when i Install sample data,the error display:the integration between source and integrity must be enabled to install the sample data.

how do i sovle it?

ACCEPTED SOLUTION

Accepted Solutions

Guang,

This is just a small configuration step you need to take. In the Integrity Admin Client, in the Configuration Management node, click on Policies, and then right click on Global Policies and select Edit. On the Change Packages tab, put a check next to "Integrity Manager Enabled". Apply and restart your client for this to take effect. Once you have done this, the sample data/solution should install without a problem.

See the picture below:

Manager_enabled.jpg

View solution in original post

1 REPLY 1

Guang,

This is just a small configuration step you need to take. In the Integrity Admin Client, in the Configuration Management node, click on Policies, and then right click on Global Policies and select Edit. On the Change Packages tab, put a check next to "Integrity Manager Enabled". Apply and restart your client for this to take effect. Once you have done this, the sample data/solution should install without a problem.

See the picture below:

Manager_enabled.jpg

Announcements


Top Tags