SLM

Hi everybody I have a question about strange resule a got by using macro in batch export.When i use the macro below in Isodraw in macro TAB directly, it work perfectly... but when i use the same with the same file as exemple, in file batch export withmacro Clean up, i loose all my a, b, c, d.... the macro language should convert to path and not delete???Thanks in advance for comment!!!Here is my exemple...Macro Clean up # CS All text to Arial Select if Font is not equal to 'Arial' Text font "Arial" Select none # CS stroke bubble text Select if Text is equal to 'a' Convert text to paths Select none Select if Text is equal to 'b' Convert text to paths Select none Select if Text is equal to 'c' Convert text to paths Select none Select if Text is equal to 'd' Convert text to paths Select noneEnd Macro

I am getting an error message when I try to extract a UPIPCO message for a figure in Provisioning Manager. Here are the errors I'm getting: ORA- 01422: Exact fetch returns more than requested number of rows and ORA- 06512: at "Aspect.Remove_Unchanged_Data", Line 307 ORA- 06512: at "Aspect.Setup_Extraction_Data_Table", Line 30 ORA- 06512: at line 1   Anyone else have this problem or know how to fix it? Does PTC list the errors for Provisioning Manager anywhere? I haven't found anything on these errors...Very frustrating...

Hi All,I need more understanding on data flow between Pro-E, Windchill and Arbortext Iso-draw.Once any assembly or part created in pro-E and if I check in that as a e-BOM in windchill, it will get published andhave its own representation.Now I want to make an illustration using the e-bom from windchill. How can I use that representation(.ol/.pvs files) from windchill?Again if i made change in e-bom in pro-e and again i checked in that in windchill, How my illustration directly updates?Is Anybody having Idea? Please help.Thanks,Manisha

When trying to insert a key ref in content we are experiencing a ridiculous lag time (2-5 minutes) before the key reference window appears. I'm wondering if anyone else is experiencing a similar lag time. Note: Once the window appears we can insert the reference quickly. Anyone know of a way to improve the performance of the key ref window?

We would like to ensure that "check completeness" is run on content before AE is closed. Is there a way to do this? Is there anything we should be aware of that could cause issues when implementing this? We would still like the option to turn off this functionality when required.

Hi,We use the command dlgitem_set_list_count to cleanup a listbox after some searching in a custom made dialog.When we create the dialog and populate it we did not fell any time consuming change after upgrade. But when we perform some filtering, the cleanup operation with dlgitem_set_list_count(DLG,listbox,0) takes to much time to complete. In Editor release 5.2 it was not a time consuming event.Just to try to clarify the steps we use:Create dialog - OKCreate List box - OKPopulate list box - OKFilter array - OKCleanup Listbox - Very time consuming compared to release 5.2Populate Listbox with filtered results - OKAnyone facing similiar performance problems? Any tips?Thankyou very much

We upgraded to AE 6.1 last week. Since then, users have noticed that their screens scroll downwards after they paste content into the xml. Does anyone know what causes the screen to scroll down? Any suggestions as to how this can be fixed?

Dear PTC-team.As of now, displaying a CGM-file via IsoView is only possible within the Internet Explorer (without using third-party add-ons). Given that Internet Explorer is not necessarily the first choice for many customers, the question arises whether there are plans to enhance IsoView so it will be able to display CGMs within other browsers, e.g. FireFox, Opera or Chrome?Best regards

Hi all,Someone get the message [A17002]catalog file warning when open Arbortext Editor 6.0, only one machine. “Confirm”, then open AE normally.For the demo.xml, the keywords "1.0" is separated.the demo.xml is the following, when I delete the "1.0" (include " "), we can open AE normally.--------but the demo.xml is wrong, so we can't integrated the AE to CMS.We can't find this problem before.Could you give me any tips please?Your assistance will be highly appreciated in this regard.Thanking you

The DCF file covers many things, which makes it complicated and not always well understood. This is an issue every installation must deal with. A GUI (like Styler) for .dcf files would simplify the task of specifying this vital information and help users get the most from their Arbortext software.

Hi,I have developped a customization in ACL language for Arbortext Editor. Is it possible to protect the content of the acl files by encryption?RegardsXavier B

Hi,Has anyone else discovered a problem with attribute tests run against lots of elements that control the Edit Window display after upgrading from 6.0 to 6.1? Specifically, I am encountering intermittent crashes (some "unhandled exception" failures, some segment 11 failures) triggered by screen highlighting of profiled content. For example, I want the following to be highlighted red: <para book="first">blah blah blah.</para>And this to be highlighted blue: <para book="second">waa waa waa.</para>And this to have no highlighting at all: <para>all work and no play.</para>I had a user report an unhandled exception crash opening a particular document. I replicated the issue. I chased the code and could avoid the crash by disabling the FOSI call (via system-func). However, when I tried opening a very small chapter from this same document, while the code was enabled, the chapter opened fine. Then I tried opening the whole document and now I can't make it f

Hey All,I'm trying to write a macro that will replace a custom linestyle named "17-0.6-0.6" with the "Dotted" linestyle. I keep getting errors at "G = Activedoc.Styles[i].name". Does anyone know a solution? Here's what i have so far. I'm using IsoDraw 7.1.Define S_QTY as integerDefine i as integerDefine G as stringS_QTY = Activedoc.styleCountFor i = 16 to S_QTYG = Activedoc.Styles[i].name If (G = "17-0.6-0.6") If (exists (activeDoc.Styles["Dotted"]) = false) Then Activedoc.Styles[i].name = "Dotted" Else Delete Styles G "Dotted" i = (i - 1) End IfS_QTY = Activedoc.styleCountEnd forEnd MacroThanks in advance.

I have made multiple dita files .Please help me how to download the dita files from the arbotext styler in one shot.

Has anyone seen the errors below when launching AE? How would I go about fixing these?

I'd like to setup Arbortext Editor to list all my key definitions so that a user can browse in Reference Manager and insert a keyef from the key definition map that is stored in Windchill. I found that I can set ditakeybaselist=uri. But I don't know what the Windchill URI would be.

Hi Folks,We typically use EPS files for publishing documents to PDF. However, we also produce RTF versions for some users to work on new versions.The issue is when rendering to RTF, EPS files are only linked to the resulting RTF - user need to manually break the link to embed them in the resulting file.I was hoping to eliminate the need for this manual step by having Arbortext convert the EPS files to PNG or JPG so that they embed automatically.I use the following command prior to rendering to RTF:set graphicrtftransform=epsngHowever, the resulting images are very poor in quality. I have EPS files that are 400-500K resulting in 1-2k PNG files. Are there any settings for the image converter that can be tweaked to produce slightly larger files that are a better resolution?I have noticed the same issue with HTML output too. I see there is a product idea Better conversion of EPS files in Web output‌Any ideas?Thanks,Rob.

Subject - How to get a nodeValue using APPBackground- I am using ufe elements which contains DIVISION REFRENCE,now I want to fetch the value of this ufe elements which actually contains the value of division refrence.//APP source editvar currentNode = formatting.currentXMLNode;application.alert(currentNode.nodeValue);But it is throwing null value

Hi everybody,I have an issue with some cascading filters in my bookmap: When I apply a first filter on a topicref that is in a chapter in a part it works perfectly fine... But when I try to apply a filter on a topicref inside the filter on does not work!If you have any suggestion, it would be greatly appreciated!Thanks

Dear all,I make a manual map, but I need publish the document using the topic's style. How can I control and set the ditamap's stylesheet associate to the topic's (or chapter's or a customed DTD topic‘s) style. Thanks!By the way the new interface of our forum is very cool!make a dita map.select the stylesheet, how can I control and set the ditamap's stylesheet associate to the topic's (or chapter's or a customed DTD topic‘s) styleCould you give me any tips please? Your assistance will be highly appreciated in this regard.Thanking you

When trying to import an Excel table into AE 6.1, a message window appears before the content is pasted into the xml. I'm just wondering if anyone else is seeing this message? The Excel table is inserted into the xml, but I'm just wondering why this message appears. Can this window be disabled?

How are others in the Technical Authoring Community dealing with Illustrated Parts Lists? I realize I'm scratching the surface, but from what I understand "Intelligent Graphics" have a list (Parts List) embedded. When you use the intelligent graphic how are you accessing the list?Creo-Illustrate does not have capability to embed a "Parts List" in a Figure. From what I understand IsoDraw does (please recalibrate me if need be).Ultimately, what I'd like to get to is processing such that Figure is on one page and Parts List (when present) is opposite.Thanks!

Hi ExpertsI have just started to work with Arbortext software and am having some trouble. In attempt to set up the dynamic publishing system, I have Completed Installing Arbortext Editor, PE, and ACM. Also,have sucessfuly connected Arbortext Editor to PE. Now, I am using Publishing engine with arbortext editor to publish document. My problem is I am not able to use custom stylesheet while publishing. How to use custom .style stylesheet for publishing? Publishing engine always use the default style sheet to publish. As a work around I am replacing default stylesheet with custom. I read the discussion bellow with the same issue, but I couldn't understand the solutions discussed. Using custom stylesheet while publishing using publishing enginePlease help me to understand.Thanks in Advance.

I have been upgrading our users to Arbortext Editor v6.1 M050 and several users have reported the following problems:1. When entering text in the edit window, all of the text in the edit window will disappear for a several seconds and then reappear. For some users this is happening each time they enter text in the edit window.2. When the user touches any key, the cursor changes to the blue spinning circle and there is a delay in the newly keyed text appearing in the edit window. As the user types they keep seeing the blue spinning circle and periodically the edit window goes blank for a few seconds.I had this upgrade installed on my PC for a month and experienced none of these problems. Has anyone experienced or heard about such problems? I've contacted our Arbortext tech support provider and am waiting to hear back from them.Regards,Rick--Rick SchoenManager, Editing/Typesetting & Application Servers, Electronic PublishingJournals Division, The University of Chicago Press1427 East

This is the second time I'm requesting for a trial version, and I'm getting the same message that my host id is invalid.The first time I've requested was ~4 months ago and I get trial license within 3 days agter my requisition. Am I going to receive a trial license for this time?I also wrote an email to -', though I don't get any reply yet.I'm looking for an easy and appropriate way to request Arbortext licenses. Thanks in advance.Andaç