Addtl Creo Products (View/Sketch/Illustrate/Layout/ Schematics and Creo Direct)

In these days, We are making a custom viewer using Creo View WebGL ToolkitCustomer want to see 3D model using Shaded with Edges render mode.Is it possible to set Shaded with Edges render mode using Creo View WebGL Toolkit?https://www.ptc.com/en/support/article/CS338147There is no solution for this.Do we have a plan to make it?

I want to view a model as a wire frame with hidden lines in Creo View Express, but with black lines rather than the kaleidoscope of colours the model is in when I open it in Creo View Express. I've tried following the instructions on this help page:https://support.ptc.com/help/creo/view/r9.0/en/index.html#page/creo_view/visualization/shared/To_Edit_Color.html#wwID0ECMGS I've selected everything in the model .A Model Parts tab appears on the ribbon, but there's no Color tool on the toolbar. The model I'm opening comes as an edz file.

Is there a way to pan my view of the model left/right/up/down using the keyboard in Creo View Express? Is there a way to rotate using the keyboard? I've found out how to zoom using the keyboard (Ctrl + for zoom in, Ctrl - for zoom out) but panning and rotating escapes me.

Is there a way to pan my view of the model left/right/up/down using the keyboard in Creo View Express? Is there a way to rotate using the keyboard? I've found out how to zoom using the keyboard (Ctrl + for zoom in, Ctrl - for zoom out) but panning and rotating escapes me. I've tried searching the help and even Googling, but I can't find the answer.

Creo Schematics 10 and 11 crashes when trying to export a pdf of the design sheets. We are able to reproduce this in an empty design with two sheets. We have narrowed it down to the formats that we have been using for years. Creo Schematics 4.0 does not have this problem exporting with our current designs and the attached test design. The Event Viewer in Microsoft shows Faulting module name: DL180PDFL.dll, version: 18.0.4.3, time stamp: 0x62a673dd.  Note, that PTC start template that ships with the tool does not have this issue so please test with the attached files. We are unable to update until this issue gets resolved.  I am concern that this will impact other customers that have custom design templates (formats).

In Creo Parametric, it is possible to select the "seed and boundary" surfaces of any given model. My stakeholders are asking me to color in great detail for the media we create in Creo illustrate and it is extremely tedious because one must select all the faces individually. Coloring in Creo parametric is more ideal and I cannot control engineering who are giving me models with nonsensical colors. It is up to my team to color the model and we need the function in creo illustrate to select surfaces more quickly based on seed and boundary or like Maya where you can just glide your cursor over the surface to color them. Anything would be better than what is currently available to color at the face level in creo illustrate.

when I try to create a flat harness, with a multitude of wires stuck together, it places the wires in relation to the z axis. therefore, I cannot move my threads so that I can see them all in profile.How to make the flat position like image 2, I can move my segments in this direction

Hi Guys,Can we add the "IP Address" in .ini format, which we used for the Creo View Watermark? Regards,Aj

Is there a way to assign markups to individual viewstates so that when you are switching between them the markups don't follow?

It is very hard to get interest in the markup in Creo Veiw when it is much easier to draw on a printed paper the Engineering systems needed.  For example surface finish, Weld Symbols, Diameter Symbol... etc and so on.  It is 2022... this is a bit embarrassing to try to get the business to adopt markup when the tool is half way designed.

Can a Design Template be changed from Landscape to Portrait format?

I want to use the Watermark Editor to display the object number, name, revision and status, but I don't know how to set it up.----------------------------------Translated the Subject from Japanese to English using google translate Subject - Watermark Editorで属性を表示したい-By Community Moderation Team.----------------------------------

Choosing User Defined for this sub assembly in this simplified rep automatically unchecks the part.  Checking the box sets it back to Master Rep.  How do I get a user defined representation to be allowed to display for this subassembly?   in creo in creo in pvz in pvz

In reguards to https://www.ptc.com/en/support/article/CS210906.   I have been playing with this and discovered these attributes about two years ago and have found it very valuable.  One thing that happened though is I rolled a dash number of an install , It was pretty much additions but it rolled about half of the Part ID's within the -002 part and now i need to redo all my tracking markers / context ID's  Why wouldn't it have kept everything that didn't change with the same numbers and add the new ones. 

Tried placing Decals on models...they must be invisible?  Went thru the prompts, searched in the HELP section, did the Mapping Shape and wore my tin-foil hat for a bit...???!!!   It's on a flat surface and the model is brought in as a STEP file?   Screenshots show the application of the decal...invisible.  

Hi all, when processing a save as of a creo parametric assembly in whindchill, I would like to include the illustration work.Unfortunately creo illustrate file is not embedded. what is your workarround whith for this use case? Mine is to save in local the c3di, break the link to the source, reconnect windchill and reconnect to the new published PVZ...

I was wondering if the Creo View BOM read in parameters from creo parametric (version 10) assemblies and part files, so that the names, item descriptions e.t.c would match. As well as that I was wondering whether the BOM lists matched in terms of the ordering of items/parts, so that the parts appear in the same order in both Creo View BOM and Creo Parametric BOM.

I'm trying to roll Creo View out to some pople within our company but don't want to without getting a few things ironed out. One being the publisher. Why does every job with the publisher fail! Has anyone got a way around this? Number 2 see attached, CYS and planes show up when opening Creo View out of both Windchill and ThingWorx. Anyone have a solution for this? 

Hi Folks, I have few question related to Creo schematics as below.1. How to restrict the terminal connections? is it automated or manual? 2. How to show the component label in 2Dschematics & 3Dcabling?3. Real time mass of Harness?4. Do we get the branded or industry standard catalogues like wise TE connectivity with 4 connection ports?5. How to we customize of create our own catalogue in schematics?It would be really helpful to get the answers for the above questions with specific examples if possible. TIANaresh

Does anyone know why the "Match whole word only" option would be greyed out in the Creo View Find tool? I am unable to find a setting to turn that on. I am using Creo View Lite.  

I have schematics design created in Creo schematics 8.0. Some connectors are located on sheet 1 and some are on sheet 2. Wires are connected between this connectors using highway.I have more than 3 sheets in this design and want to export selected components from two sheets in one xml. While exporting this design if i select "Selected",  components from active sheet only gets exported although i have selected components from second sheet also.I want components from both sheets in one xml but dont want to use "Export complete design" option. Is their any other way to do that ? Or is it Creo schematics issue ?

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0Not able to map the path which I want to use for Central Catalog and Temp SubmissionHere are the errors that I facedGetting network error

Hello everyone,I'm not an expert Creo View user and I'm trying to find a way to obtain the minimum-size enclosure that contains a Creo part or assembly (or imported STEP files). In Creo Parametric you can set the Enclosure feature to "optimized" (from 11.0) or orient it according to a selected CSYS.I couldn't find a similar option in Creo View: when using Markup > Measurements > Envelope, the bounding box is always created according to the default CSYS. In the attached picture you can see a practical example where my part's CSYS is not oriented according to the minimum-size envelope/enclosure.Am I missing something? Thanks.

I have an assembly opened in Creo View and all of the sub-assemblies show up fine in the structure tree. However, in the model tree it will only show the top-level assembly that I have open. I would like to select parts in the graphic window and have them highlight in the model tree, like how it works in Creo Parametric.  I have tried reloading the branch links of the top-level assembly in the model tree, and the next level of sub-assemblies' link correctly, however as soon as I go to the structure tree and come back to the model tree, all of those links disappear. If anyone has any ideas how to fix this I would definitely appreciate it!

Dear CommunityVersion: Creo Illustrate Professional 10.0.0.0 I would like to display the sequence step description on the published PDF.There is no setting to configure it in the PDF template:https://support.ptc.com/help/creo/illustrate/r10.0/en/#page/creo_illustrate/install_config_guide/Formatting_PDF_Publishing.html#Is there some workaround or hidden attribute to enable it? Best wishes and thanks for your help Alex