SLM

All,Having trouble getting an SGML instance to load in Editor (5.2). Doesn't like two specific @key values. ' [A11054] Invalid value "..." for required attribute "key" 'Neither contains 'wrong' characters, one is 75 and the other 77 characters. Here they are:frm_icticjclqm121821206917701843_icticjclqm121821214817701843_AAR40000006062frm_icticjclqm12354267816554021_icticjclqm12354267816554022_AAR40000006520The simple answer "change them" is unavailable, since they are generated via XSLT from an XML instance. None of the other @keys are as long (e.g. frm_AAGR0000001507_AAGS0000001508_AAR40000006111).Any insights would be greatly appreciated.Steve ThompsonTAD TechnicalBoeing-IDS Technical Publications+1(316)977-0515MC K83-08The truth is the truth even if nobody believes it, and a lie is a lie even if everyone believes it.NOTICE: This communication may contain proprietary or other confidential information. If you are not the intended recipient, or believe that you have received this commun

Hi Folks— I’m running into an issue with a customization. We are defining custom menu entries, some of which contain special characters like U+2611 (check box with check: ? for those of you with font support in email). Everything works OK in my Windows Vista + Arbortext 5.4 setup, but the special characters don’t appear in the customer’s Windows XP + Arbortext 5.4 setup. Has anyone run into this before? If so, did you find a workaround for displaying these special characters? Thanks for any wisdom you can share. --Clay Clay HelbergSenior ConsultantTerraXML

I've got a macro that creates a text file, then I want it to open the text file in Notepad at the end.I tried the edit command (noted in the documentation for 7.1, but apparently supported on versions 7.0 F000 and later - I'm using 7.0 M050):edit "c:\WINDOWS\notepad.exe" gl_write_file_name(gl_write_file_name is my variable for the file to be opened.)I get an error message when it gets to the edit command:"Illegal value has been used"I've also tried it with a specific filename (rather than using a variable for the filename):edit "c:\WINDOWS\notepad.exe" "X:\Illustrators Info\illustrators files\Tim Sharp\2011-07-15 drawings.txt"but it still gives the same error.Strangely, if I use the command without specifying a filename:edit "c:\WINDOWS\notepad.exe" ""it does not give the error. What it does is pop up the "Run Macro" box (the one accessed from "more macros..." when you select "Macros" from the menu) but still it does not open Notepad.Am I doing something wrong or could there be a bug i

Hi,I work for an aerospace industry in the technical publication office. We use Arbortext Editor to create and modify Data Modules (.sgml files) acording to the AECMA 1000D. One of our customers is having trouble with our documents due to the automatic processing instructions that Epic Editor write in the .sgml files, like:file:///C:/DATI/0_Raccolta%20SpecificheXXXX/Epic/proced/proced.fos" type="text/x-fosi" media="editor" alternate="yes">This kind of tags, are not visible to the author with the Epic Editor interface, they can be viewed and removed only using a text editor like Note Pad. I've read that the last two instructions () can be removed by turning set writepi=off on the advanced settings.But what about the first two instructions? The first one reports to the hard disk location of the DTDs and Style Sheets used by the program to open the file, the second one is an automatic string with programs information that Epic put at the beginning of every document that is saved.Can i

I am trying to install an instance of Arbortext 5.3M040 PE on a newserver (64-bit, Win2008 Server EE). The Adobe Universal Print Driver that ships with distiller server isn'tcompatible with Win 2008 (at least per the Adobe forums). Any ideas on a good generic postscript driver for LPT1 port to use withPE? Since I can't get distiller server to install the generic distillerdriver (what the PE documentation says is used internally for testing),I'll need to come up with something else. Thanks -Jason A. Buss

Hi all,Is there a best practice or common practice for specifying a particular font for a particular language in Styler? For an unlikely hypothetical, say I wanted French content to be displayed and printed in WingDings.Do I need to add conditonals in the stylesheet that are leveraged when my xml:lang is fr-FR? Or is there a configuration file that should be updated? I've been through a lot of the Styler and Admin documentation and see some guidance for when fonts that are not on a user's system must still be specified. And I found the bits about Combined Fonts. But neither of these areas cover my basic need to specify certain fonts for certain languages. What am I missing?Thanks so much for your help and attention to this message.Kind regards,Anne

Hello.I have recently upgraded to version 7.2 and quickly discovered that lines are no longer magnetic. The end and centre points are, but I could always snap other items to any point on a straight line. For example, if I draw an elipse and a vertical line (to represent a centre line), I would be able to drag the elipse and snap it's centre point anywhere along the line. Now, I must either snap the elipse to an end point and shift drag it to the desired location (no good if the line is not aligned to the grid), or draw a perpendicular line and snap the elipse to the end point of the perpendicular line. I have also installed this copy on to a new machine, so have I missed a setting somewhere or has this function been removed?Thanks.

My question is simple. Is there a hot or quick key combination for "select element" window? I use it a lot and it seems ridiculous to have to navigate to the menu bar everytime I want to use it. Any info on this would be greatly appreciated! Thanks!

I'm trying to work out the properties of an ellipse so that I know it's x and y extents.Using the Complex Data Types, "ellipse radius" seems to give the maximum radius from the centre, but I don't know how to get the minimum radius.When you select an ellipse, the status bar on screen shows the values for it - with the maximum radius first (though the icon shows a diameter), then what appears (from its icon) to be the minimum diameter (it equates to the Complex Data Types "ellipse value"). However, when I draw a line across the narrow width of the ellipse, it's length doesn't match this value.What is this "ellipse value" and does it have a relationship to the minimum radius/dimeter? If not, how can the minimum radius or diameter be worked out?

Hi all,I'm looking for a way to call the first topic title on a PDF page into a header. The GUI in Styler 5.4 gets me about halfway there. I can Insert>Element Content and select the first title started on page, but I end up with fig and table titles as well. Does anyone know if I can use an XPath expression to drill down on a specific page?Many thanks for your attention,Anne

According to PTC documentation with content management systems track changes can be only applied to single object . If the tagging for a change tracking change affects more than one object, then the system will not interpret the change tracking information correctly.Any suggestions/workarounds?

Hi guys,One of our customers is trying to upgrade their system to Arbortext Editor 6.0 and has hit a roadblock.[cid:image001.png@01CC37E7.5E5C6BB0]In case you can't read the graphic above, the error message says:(-103) Cannot checkout an uncounted license within a Windows Terminal Services guest session.What the customer is trying to do is work with Arbortext Editor from home, just as they have for years previously in 5.3 and 5.4. The customer connects to his work desktop via Windows Remote Desktop. In this case, it seems that their node-locked license in Editor 6.0 does not want to play ball with Remote Desktop.Has anyone else encountered this problem yet?[cid:image002.jpg@01CC37E7.5E5C6BB0]Gareth Oakes+61-439-743-740

We use lots of 3d data files as a basis for our drawings.Once they are converted to 2d files, we clear away lots of the border lines to make them look cleaner and more like proper drawings.With iges files, these lines generally become Pen type "Border" so that I can write a macro to remove selected "Border" pen types.However, when use a converted 3d PDF file (by storing it as a vrml file before loading into Isodraw), it doesn't add border lines unless we use a lower Thin Line Threshold.It then makes all border lines into thin lines so there's no way to separate them out in a macro.Is there a way to specify the linetype for Isodraw to use for Surface Borders?

I've done a few macros that ask the user to select a couple of points on a drawing and then the macro draws something based on the position of the points.The problem is that despite adding 'select none' into the macro, a line at one of the selected points always remains selected after the macro has finished.I've done a minimalist version below to illustrate the point.macro test_select message "Pick a point on your drawing" define me as MouseEvent define start_x as point define start_y as point me = Wait MouseClick start_x = me.ptMMGrid.x start_y = me.ptMMGrid.y create line (start_x + 10) (start_y + 10) (start_x + 25) (start_y + 25) select noneend macroTheres no problem if you just pick an empty point on the drawing, but if the cursor snaps to a line or ellipse, that line or ellipse becomes selected and remains so after the macro finishes.Is there a way to stop this?

Hi all,In illustrations instead of using callouts we use normal text command placing callouts(numbers).I've created macro to select each number and place a polygon around each number.But if same number is available twice in the illustration. The macro places the polygon in between the two like numbers.Its because for selecting each number I use select if text is equal to command. I would like to know whether any macro can be created to select the same numbered text can be selected one by one. Thanks & RegardsVaduga

Helllo,Thanks for looking, my problem may be simple - but it has been driving me crazy! I want to select an object based on its element ID (Object ID). I have tried a group and a line and i5 doesn't select the object. I have even tried SELECT IF. As a last ersort I used tool on the main toolbar, edit menu -> Select... and nothing is selected.When I find an element ID using ISM (el.element_id) it returns the number (not the "AUTOID_") so I have also tried only the number part. If you look at the 7.1 Macro Language Reference documentation, page 64 I have followed the examples, even changing some wording around, just encase a typo exist in the documentation.Has anyone had a similar problem and found a solution?Many thanksAlan

I processed a job as a Revision and it came out with rev bars. How do I get rid of them?

hi,the writer who creates our graphics is leaving the company and her machine will be wiped clean. I need to reinstall isodraw on my win7 machine. can you direct me to the correct person to contact for the download instructions. thanks, cm, director tech pubs

Hello, I'd like to pick the lobes of those of you who have hadexperience with supporting offsite (particularly offshore) Arbortextinstallations. Basically, I am supporting a set of authors in India, who up until 3weeks ago, were using a custom directory on one of their servers that Ikept r-synced with a custom directory on a US server. We are usingEditor 5.3 M040 on WinXP SP3 PCs, most are new (dual-core, 2G RAM orbetter). We are working with an in-house developed DTD and FOSI. We have recently gotten them access to our test server with the customdirectory we use to test changes before migrating to production, whichis a server located in the US. What I am experiencing is starting the India Editor can take 1-4 minuteson startup when loading with the US server custom directory. If theIndia Editor is pointing to the India server custom directory, Startuptime is less than a minute. Where things get really odd is once I get the India Editor open whenreading from the US server custom file, o

Available for immediate downloading from PTC's support site is theArbortext 5.4 M100 release. This maintenance release includes bug fixes only. If you want to knowall the details about this release, please check out the release notes<">https://www.ptc.com/view?im_dbkey=128958> . If you have any questionsabout the release schedule, please reference the PTC Product Calendarat:

Prior to converting all of our xml files to Arbortext's default dita, stylesheets, schemas, dtds, etc., when compiling a .chm file from .xml, a txt file with all the ids was parsed into the compilation. A section of said .txt file might look like this:#define idh_t_test_column_picker 1427Now we're using dita, and creating a .chm file has never been easier; however, I'm stuck when it comes to creating context sensitive Help. I've found a resourceid element, and thought maybe the number could go there. I'm seeing instead, in the resolved document, that the resourceid converts to a file name much, much longer. I don't know if that relates. But ultimately, the Help button on a given dialogue box gives me the error message "HH_HELP_CONTEXT called without a [MAP] section."I'm looking for a series of steps to get me on track. I've scoured the Internet and I've come up so far empty handed. What I'd really like is a series of steps to walk me through this, but any help would be appreciated. Eve

I've got Epic 6 (64 bit) installed on just one computer so far. It seems to be working okay, but I'm seeing something 'weird' occurring with the generated text in the main file I'm working on.First, is a change from Epic 5.4, in that I am not seeing the notice that my 'file is too big for automatic generated text updates'. So now when I insert a new cross reference, I am seeing the link appear immediately. This I do like.Secondly (and my problem) is that I am seeing (or rather NOT seeing) existing generated links vanishing. I'll open the file (it is rather large, just XML is 60 file ENTITIES and just over 4 MB). When I open the file, it appears (and I have not scrolled through the entire file) that all the existing generated cross references (and it is only cross reference links that do this) are there. Yet if I add a block of text, it seems that those links following the added text just go away. I'm getting close to 'publishing' time so having many of my links missing would not be a '

And now we need to ask a favor of all you Adepters members. I was totally focused on the question being asked when I did my last reply. Therefore, I overlooked the content of the attached image.Please delete any and all copies you have of this thread that contain the actual image. According to my local subject matter expert it is Boeing proprietary data, and that means it should not be circulated without the appropriate markings and controls.My apologies for any inconvenience and for having contributed to the situation.Steve Thompson+1(316)977-0515

Is it possible to work with IsoDraw 6.2 or 7.x on "Windows 7 64bit"?

This is related to my Java questions yesterday. I actually got into theJava work because I was having troubles verifying that the ACL system orsh commands were working.Today I was able to get this to work:sh 'C:\Program Files\nsiv3.1.15.2\bin\makedoc.bat'I need to pass it a parameter though, and I get a message that theparameter isn't understood if I do this:sh 'C:\Program Files\nsiv3.1.15.2\bin\makedoc.bat' deployAnd in this version the cmd window just flashes by doing nothing:sh 'C:\Program Files\nsiv3.1.15.2\bin\makedoc.bat deploy'I suppose I could just create another batch file that contains theparameter, but I would like to use the tools as provided if I can.I've also tried the system function, which seems to do nothing:system("C:\Program Files\nsiv3.1.15.2\bin\makedoc.bat")