SLM

I recently submitted my Arbortext Editor file to our stylesheet guru (as I don't have the software to run the stylesheet.) He's made some changes, but now when I open the file, I am getting several error messages stating "unknown element in start tag". This is for over 30 elements that should be standard (docwp, wpno, alist ...etc.) How do I resolve? Sorry if this is a basic question - very new to this software. Thanks!

Hello Experts!!

Hi,I am trying to modify a fosi to support an acronym tag reference.I have one element <acronym> with two child elements <acroterm> and <acrodef>. <acrodef> takes an id attribute. <acroterm> takes an attribute refid of type IDREF. This tagging is used where the acronym is first defined.Subsequently, if <acroterm> is used alone in any other element, such as <para> element, it is supposed to generate the original <acroterm>'s (content) and create a link reference back to its definition sibling where its refid equals the definition element's id. Is there a way to accomplish this using FOSI?Any suggestions?

Hello All,I have downloaded and setup the Arbortext editor trial version and trying to configure the CMS (Documentum) need following document, can someone provide the same unable to access.http://www.ptc.com/WCMS/files/138341/en/cms_guide.pdfAlso, did not find the trail version / license key to configure to perform following steps.You will use the PTC License Landing Page to configure the PTC Arbortextsoftware licenses for your hardware.1. Go to the PTC support page at http://www.ptc.com/support.2. Choose Arbortext.3. Choose Arbortext License Support and log in to your PTC account whenprompted. You will need your login name, password, and Customer Number.4. Choose your Product Family from the list.5. Choose the Version from the list. The Hardware Selection is then displayed.6. Enter the PTC Host Id (available by following the directions at the beginningof this section). If your computer is already in the system, you can Browse forit.Enter the name for your computer in the Host/Triad Na

We're using Arbortext Editor v6.1 M010.I've had several users report this behavior to me, but I have not been able to duplicate it myself.If they are editing a file for which they need to track changes and use the Arbortext keymapping Control+Shift+E to toggle TrackChanges on and off, every other time they key Control+Shift+E the Preferences dialog window opens. I have searched in vain for any mention of a keymapping which opens the Preferences window and can find none.Has anyone else experienced this behavior? Any suggestions on how to fix it?Regards,Rick

6.0 m090.Hi. I have a CALS/OASIS table consisting of three almost-page-length rows(two columns wide). In each of my two Styler environments, the tabledoesn't break. It overruns the page. In at least one of my FOSIenvironments, it breaks as expected, producing a three-page, continuedtable.I have Edited Source on all of the table components of the Stylerstylesheets (not to change them, just to SEE the FOSI coding) but I can'tsee anything that suggests a difference in breaking rows. Keeps, forexample, are all Derive/Derive/No/No/No on tgroup, tbody, row.Any thoughts about how Styler might think about tables differently?deepcontentsplitting is off for us, but turning it on doesn't change thisbehavior.If I insert an empty 0.01mm high row between each of the real rows, thenthe table appears to break as expected which is to say it looks right inthe PDF (viewed onscreen). I don't know if the blank rows are ending orleading the pages.-- Paul Nagai

Hello All,While Installation of editor, it ask for the Publishing Server - If I do not have Arbortext Publishing Engine - What should be the option ? - Can I get the trail version for Publishing engine only - it comes with Windchill server only ? - Can I use the DITA OTK / Configure the OTK , if yes , how to setup /configure ? OR bydefault comes with the setup.Thanks - MVK

Dear all,We konw that the dpi basically is used to calculate the print size of a given image. When we change the image resolution ratio, for example, from 96dpi to 200dpi, when I pubish the PDF document, the size of the image are different. The 200dpi's is larger.Then I have some questions: 1. When I publish the PDF, did the the image resolution ratio change? If changed, how much has changed? I'm not sure if some problem in my understanding of basic concepts.But I print the PDF and office word document for the image, I think the image in word document is clearer.2.When I change the image attribute width or scale, the size of the image will change also. Did the the image resolution ratio change? Can I control the dpi by these attribute, how?3.The custom want the image resolution ratio in PDF is 200dpi, and also want a width 70mm, is this possible? How can I achieve it? I don't h4. By the way, this is for PDF, how about for RTF, Web, or html? Could you give me any tips please? Your assis

Hi adepters,How to change file name or file name extension in macro.I would like to export the ilustration to cgm, svg and jpeg by macro. Macro mustchange the file extension and than export the file, step by step from *.iso to *.cgm andthen to *.jpeg. I don't know how to change the file extesion in macro ?Thanks.

Hello, My customer wants to publish in grayscale PDF for printing. I configured .appcf file below;<PDFMode color="mono" defaultLanguage="" fastWebView="no"/><Compatibility layers="yes" tagging="inherit"><PDF level="1.7"></PDF></Compatibility><ColorProfile defaultCMYK="" defaultGray="" defaultRGB=""/><Images epsDPI="600" linked="original"/>..... The output looks good (=monocrome) from my eyes, however it includes all CMYK colors when customer analyze it in Adobe Acrobat. Is it possible to publish true grayschale PDF ?*I use Styler 6.1 M030. Best Regards,Hirose

I had the following in a FOSI:<specval attname="starts-with(normalize-space(.),'-')" attloc="#XPATH" attval="1">which worked as expected,but AE 6.0 automagically converted it to:<specval attname="starts-with(normalize-space(.),'-')" attloc="#XPATH" attval="1">

We are using the service manual application and I have not found where I can insert an appendix element? Am I missing something?ThanksBryon

Is there a way to check a page counter in the styledesc?I'm trying to do this:<specval attname="wpfolioct.txt" attloc="#FOSI" attval="#GT#\0\"> or<specval attname="wpfolioct.txt" attloc="#FOSI" attval="#NONZERO">but I'm getting a message that the content of wpfolioct.txt can't be retrieved.

Hello All,I am new to PTC Arbortext editor.I need to install trail / evaluate version for Arbort text editor for following.1. Need to create the templates - using Editor tool / Do i need styler or editor ?2. Need to create re-usable components and store in Documentum repository.3. Publish to PDF.Reequest you to le me know, can i get trial version of above fetaures component like styler / editor , publishing tool and Documentum repository connector.? if yes, from where can some provide link for the same ?Which version of documentum content server / repository will be compatible.

Dear all,I meet a confusing problem. When I using the Arbortext default DTD, such as topic, concept, we can paste table in office word to the xml, and it can generate the <table> automatically.But I customized some DTD, and create the topic, when I paste table in office word, not only table, also text, the Arbortext Editor will promet "agettext: Msgid not found in message file: CopyPaste failed to convert clipboard". Every time paste...After I changed the pastesource preference to mif;rtf;txt (delete the htm), it didn't promet "agettext: Msgid not found in message file: CopyPaste failed to convert clipboard" again, but still I can't paste table in office word to xml. it will generate the <p>.Did I lost some setting, or steps, or some check for the DTD? Could you give me any tips please? Thanks!

Hi adepters,how to rotate some cgm graphics for pdf output in editor 6?Thanks for your advices.

Some addiional questions have occurred to me about using APP: - Chapter 2 of the APP Users Guide is about the APP User Interface. How is it accessed?I saved a sample XML document as a .3d file, but it opened in Arbortext Editor as ASCII text. - Does APP have anything like the FOSI formatting pass reduction feature? - FOSI uses cache files to speed up formatting after a document has been formatted once. Does APP have anything similar? - Does APP have anything like the FOSI formatting faults feature? - Are there any books out or in the works about APP?Thinking about FOSI publishing solutions I know about, some additional questions come to mind: - Is is true that APP does not support run-in titles? Run-in titles are required in milspec documents. - Can APP write an external ASCII file with or without markup? - Can APP formatArbortextuser-defined tags (UDTs)? - Can APP test and use the value of an ACL variable? For example, a user selects a custom menu item such as File->P

Hello: I have recorded a macro in Arbortext Editor and I would like to customize an icon and place it on my toolbar. I used to do that all the time in ProEngineer but can't seem to find out how to do it in Arbortext. Is it possible?ThanksTim

Hi,One of our colleague meet a problem, the Arbortext Editor's icons is missing, but still have button or a black line, you can click it.When setup the installation package and select "Repair", it will OK. But when using one day or two, the icons missed again.I think maybe the icons files is lost, why? Is there any programs are not compatible with the editor?Thanks!

Hi all,I saw this come out just before the holidays. If you missed it, check thisdocument which lists the details of the change along with other 2014Arbortext Announcements (including the FOSI one we beat to death).

Hi,Silly Question. How do I make an ordered list labelled a, b, c, rather than 1,2,3?

Looking for answers to my APP-related questions, I found the following in the 6.0 Help Center under"Print Engine Comparison": "In version 6.0 the FOSI engine is somewhat faster than APP, though we expect to close that gap over time." The recommendation is touse FOSI if you"require the fastest possible performance."I checked the release notes for 6.1, but I found no mention of improved APP performance.PTC/Arbortext does not seem to fully appreciatethe importance of formatting speed. A decrease in formatting speed could require extra hardware and personnel as well as changes to well-established publishing processes. No organization with a stable publishing system wants to make costly changes in order to accommodateslowerformatting speeds!Suzanne Napoleonwww.FOSIexpert.com"WYSIWYG is last-century technology!"

Hi, I am trying to download and use Arbortext trial version. For getting the license file, I need the host id of my machine. The host id of my machine is 4C-ED-DE-AA-3B-04 which is shown as invalid. Please let me know what should be done.

The DoD and the aerospace industry have relied on Arbortext Editor and FOSI for twenty years, and I expect they will object to PTC/Arbortext’s announcements regarding FOSI and Print Composer. Some aerospace and Defense subcontractors/suppliers are small businesses that cannot possibly afford APP and Publishing Engine.As with defense and aerospace, some major global enterprises are heavily invested in Arbortext Editor and FOSI. I expect they will have objections as well.BTW: I do not know how many Arbortext Editor customers publish with FOSI. However, I can tell you that my posting to the Arbortext Community a few months ago about using the FOSI Putgraph category to re-size graphic entities for print/PDF output received more than 2,000 hits in less than three months.PTC/Arbortext is recommending Styler with the APP engine, but abundant evidence has shown that Styler is adequate only for simple formatting requirements. While service information has little or no need for fancy page layout

Available for immediate downloading from PTC's support site is the 6.1 M040 release.For details about this maintenance release, please check out the release notes:For Arbortext Editor/Styler/ArchitectFor Arbortext Publishing EngineFor SPR Fixes in the releaseIf you have any questions about the release schedule, please reference the PTC Product Calendar at:http://www.ptc.com/cs/product_calendar/PTC_Product_Calendar.htmThanks,Pushpinder Toor, SLM Solution Manager